|
|
Part: PCM1793DBR
Category:
Data Conversion
-> DAC (Digital to Analog Converters)
-> Audio DACs
Description: ti PCM1793, 24-Bit 192 KHZ Sampling Advanced Segment Audio Stereo DAC
Company: Texas Instruments, Inc.
Datasheet: Download PCM1793DBR datasheet File size : 115 kB
Request For quote: Find where to buy PCM1793DBR
Datasheet text preview:
Burr-Brown Products from Texas Instruments
PCM1793
SLES076 MARCH 2003
24-BIT, 192-kHz SAMPLING, ADVANCED SEGMENT, AUDIO STEREO DIGITAL-TO-ANALOG CONVERTER
FEATURES D 24-Bit Resolution D Analog Performance (VCC = 5 V):
Dynamic Range: 113 dB, Typical SNR: 113 dB, Typical THD+N: 0.001%, Typical Full-Scale Output: 2.1 V rms (at Postamplifier) Differential Voltage Output: 3.2 V p-p 8× Oversampling Digital Filter: Stop-Band Attenuation: 82 dB Pass-Band Ripple: ±0.002 dB Sampling Frequency: 10 kHz to 200 kHz System Clock: 128, 192, 256, 384, 512, or 768 fS With Autodetect Accepts 16-, 20-, and 24-Bit Audio Data Data Formats: Standard, I2S, and Left-Justified Digital De-Emphasis Soft Mute Zero Flags for Each Output Dual Supply Operation: 5-V Analog, 3.3-V Digital
D 5-V Tolerant Digital Inputs D Small 28-Lead SSOP Package, Lead-Free
Product
D D D D D D D D D D
APPLICATIONS D A/V Receivers D DVD Players D Musical Instruments D HDTV Receivers D Car Audio Systems D Digital Multitrack Recorders D Other Applications Requiring 24-Bit Audio DESCRIPTION
The PCM1793 is a monolithic CMOS integrated circuit that includes stereo digital-to-analog converters and support circuitry in a small 28-lead SSOP package. The data converters use TI's advanced segment DAC architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. The PCM1793 provides balanced voltage outputs, allowing the user to optimize analog performance externally. Sampling rates up to 200 kHz are supported.
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright 2003, Texas Instruments Incorporated
PCM1793
www.ti.com SLES076 MARCH 2003
ORDERING INFORMATION
PRODUCT PACKAGE PACKAGE CODE OPERATION TEMPERATURE RANGE 25°C to 85°C to 85°C PACKAGE MARKING PCM1793 ORDERING NUMBER PCM1793DB PCM1793DBR TRANSPORT MEDIA Tube Tape and reel
PCM1793DB
28-lead SSOP SSOP
28DB
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1) PCM1793 Supply voltage voltage VCCF, VCCL, VCCC, VCCR VDD 6.5 V 4V ±0.1 V ±0.1 V 0.3 V to 6.5 V 0.3 V to (VDD + 0.3 V) 0.3 V to (VCC + 0.3 V) ±10 mA 40°C to 125°C 55°C to 150°C 150°C 260°C, 5 s 250°C
Supply voltage differences: VCCF, VCCL, VCCC, VCCR Ground voltage differences: AGNDF, AGNDL, AGNDC, AGNDR, and DGND Digital input voltage input voltage Analog input voltage Input current (any pins except supplies) Ambient temperature under bias Storage temperature Junction temperature Lead temperature (soldering) Package temperature (IR reflow, peak) LRCK, DATA, BCK, SCK, DEMP0, DEMP1, FMT0, FMT1, FMT2, RST, MUTE ZEROL, ZEROR
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
all specifications at TA = 25°C, VCC = 5 V, VDD = 3.3 V, fS = 44.1 kHz, system clock = 256 fS, and 24-bit data, unless otherwise noted PCM1793DB PARAMETER RESOLUTION DATA FORMAT (PCM Mode) Audio data interface format Audio data bit length Audio data format fS Sampling frequency System clock frequency DIGITAL INPUT/OUTPUT Logic family VIH VIL IIH IIL VOH VOL Input logic level logic level Input logic current logic current Output logic level logic level VIN = VDD VIN = 0 V IOH = 2 mA IOL = 2 mA 2.4 0.4 VDC TTL compatible 2 0.8 10 10 VDC µA Standard, I2S, left justified 16-, 20-, 24-bit selectable MSB first, 2s complement 10 200 kHz 128, 192, 256, 384, 512, 768 fS TEST CONDITIONS CONDITIONS MIN TYP 24 MAX UNIT Bits
2
PCM1793
www.ti.com SLES076 MARCH 2003
ELECTRICAL CHARACTERISTICS (Continued)
all specifications at TA = 25°C, VCC = 5 V, VDD = 3.3 V, fS = 44.1 kHz, system clock = 256 fS, and 24-bit data, unless otherwise noted PCM1793DB PARAMETER DYNAMIC PERFORMANCE (1) THD+N at VOUT = 0 dB fS = 44.1 kHz fS = 96 kHz fS = 192 kHz EIAJ, A-weighted, fS = 44.1 kHz Dynamic range EIAJ, A-weighted, fS = 96 kHz EIAJ, A-weighted, fS = 192 kHz EIAJ, A-weighted, fS = 44.1 kHz Signal-to-noise ratio EIAJ, A-weighted, fS = 96 kHz EIAJ, A-weighted, fS = 192 kHz Channel se aration separation Level linearity error ANALOG OUTPUT Gain error Gain mismatch, channel-to-channel Bipolar zero error Differential output voltage (2) Bipolar zero voltage (2) Load impedance (2) DIGITAL FILTER PERFORMANCE De-emphasis error Pass band band Stop band Pass-band ripple Stop-bandattenuation attenuation Delay time Stop band = 0.546 fS Stop band = 0.567 fS 75 82 29/fS ±0.002 dB 3 dB 0.546 fS ±0.002 dB dB dB ±0.1 0.454 fS 0.49 fS dB At BPZ Full scale (0 dB) At BPZ R1 = R2 1.7 8 3 2 ±3 ±0.5 ±0.5 3.2 1.4 8 3 2 % of FSR % of FSR % of FSR V p-p V k fS = 44.1 kHz fS = 96 kHz fS = 192 kHz VOUT = 120 dB 106 110 110 0.001% 0.0015% 0.003% 113 113 113 113 113 113 110 110 109 ±1 dB dB dB dB 0.002% TEST CONDITIONS CONDITIONS MIN TYP MAX UNIT
s (1) Dynamic performance and DC accuracy are specified at the output of the postamplifier as shown in Figure 28. Analog performance specifications are measured using the System Twot Cascade audio measurement system by Audio Precisiont in the averaging mode. At all sampling frequencies, measurement bandwidth is limited with a 20-kHz AES17 filter. (2) These parameters are defined at the PCM1793 output pin. Load impedance, R1 and R2, are input resistors of the postamplifier. These are defined as dc loads.
Audio Precision and System Two are trademarks of Audio Precision, Inc. Other trademarks are the property of their respective owners. 3
Others parts begin by pc
PC-1 PC-2 PC-3 PC-4 PC-5 PC-6 PC-7 PC-8 PC-9 PC-10 PC-11 PC-12 PC-13 PC-14 PC-15 PC-16 PC-17 PC-18 PC-19 PC-20 PC-21
|
|
|
