|
|
Part: ISO721MD
Category:
Interface and Interconnect
Description: 3.3V / 5 V High-Speed Digital Isolator <<<>>><<<>>>The ISO721 and ISO721M digital isolators have a logic input and output buffer separated by a silicon oxide (SiO2) insulation barrier. This barrier provides galvanic isolation of up to 4000 V. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground, and interfering with or damaging sensitive circuitry. <<<>>><<<>>>A binary input signal is conditioned, translated to a balanced signal, then differentiated by the capacitive isolation barrier. Across the isolation barrier, a differential comparator receives the logic transition information, then sets or resets a flip-flop and the output circuit accordingly. A periodic update pulse is sent across the barrier to ensure the proper dc level of the output. If this dc-refresh pulse is not received for more than 4 µs, the input is assumed to be unpowered or not functional, and the failsafe circuit drives the output to a logic high state.<<<>>><<<>>>The symmetry of the dielectric and capacitor within the integrated circuitry provides for close capacitive matching, and allows fast transient voltage changes between the input and output grounds without corrupting the output. The small capacitance and resulting time constant provide for fast operation with signaling rates(1) from 0 Mbps (dc) to 100 Mbps for the ISO721, and 0 Mbps to 150 Mbps with the ISO721M.<<<>>><<<>>>These devices require two supply voltages of 3.3-V, 5-V, or any combination. All inputs are 5-V tolerant when supplied from a 3.3-V supply and all outputs are 4-mA CMOS. <<<>>><<<>>>The ISO721 has TTL input thresholds and a noise-filter at the input that prevents transient pulses of up to 2 ns in duration from being passed to the output of the device.<<<>>><<<>>>The ISO721M has CMOS VCC/2 input thresholds, but does not have the noise-filter and the additional propagation delay. These features of the ISO721M also provide for reduced jitter operation.<<<>>><<<>>>The ISO721 and ISO721M are characterized for operation over the ambient temperature range of -40°C to 125°C.<<<>>><<<>>><<<>>>4000-V(peak) Isolation <<<>>>UL 1577, IEC 60747-5-2 (VDE 0884, Rev. 2) <<<>>>IEC 61010-1 and CSA Approved <<<>>>50 kV/µs Transient Immunity Typical<<<>>>Signaling Rate 0 Mbps to 150 Mbps <<<>>>Low-Propagation Delay <<<>>>Low Pulse-Width Distortion<<<>>>High-Electromagnetic Immunity <<<>>>Low-Input Current Requirement <<<>>>Failsafe Output <<<>>>Drop-In Replacement for Most Opto and Magnetic Isolators <<<>>>APPLICATIONS <<<>>>Industrial Fieldbus <<<>>>Modbus <<<>>>Profibus <<<>>>DeviceNet™ Data Buses <<<>>>Smart Distributed Systems (SDS™)<<<>>>Computer Peripheral Interface <<<>>>Servo Control Interface <<<>>>Data Acquisition
Company: Texas Instruments, Inc.
Datasheet: Download ISO721MD datasheet File size : 1191 kB
Request For quote: Find where to buy ISO721MD
Others parts begin by is
IS-1 IS-2 IS-3 IS-4 IS-5 IS-6 IS-7 IS-8 IS-9 IS-10 IS-11 IS-12 IS-13 IS-14 IS-15 IS-16 IS-17 IS-18 IS-19 IS-20 IS-21 IS-22 IS-23 IS-24 IS-25 IS-26 IS-27 IS-28 IS-29 IS-30 IS-31 IS-32 IS-33 IS-34 IS-35 IS-36 IS-37 IS-38 IS-39 IS-40 IS-41 IS-42 IS-43 IS-44 IS-45 IS-46 IS-47 IS-48 IS-49 IS-50 IS-51 IS-52 IS-53 IS-54 IS-55 IS-56 IS-57 IS-58 IS-59 IS-60 IS-61 IS-62
|
|
|
