Digchip : Database on electronics components
 
Member, Distributor  
Log In
Email:
Password:


Part: EE-SA104

Category:
 Optoelectronics
   -> Photosensors
             -> Photomicrosensor

Description: EE-SA104 Non-amplified Photomicrosensordata Sheet

Company: Omron Corporation

Datasheet: Download EE-SA104 datasheet     File size : 42 kB

Request For quote: Find where to buy EE-SA104



Datasheet text preview:
EE-SA104
Dimensions
Note:
1±0.08

Photomicrosensor
Features
· An actuator can be attached. · PCB mounting type. · High resolution with a 0.5-mm-wide aperture.

(Actuator Mounted)

All units are in millimeters unless otherwise indicated.

1.6 +00.05 ia. d

9 6±0.15

0.3±0.1 0.3 ± 0.1

Part C

0.3 ± 0.1 0.3 ± 0.1 Four, C0.3

Absolute Maximum Ratings (Ta = 25°C)
Two, 0.5

Item Emitter Forward current Pulse forward current Reverse voltage Detector
Four, 0.5

Symbol IF IFP VR VCEO VECO

Rated value 50 mA (see note 1) 1A (see note 2) 4V 30 V --20 mA 100 mW (see note 1) -- 25°C to 85°C -- 30°C to 100°C 260°C (see note 3)

9.7

Optical axis

4.4

9.3±1 0.3 max. 0.25 max. 6.75±0.2 Cross section BB

0.7 ± 0.1 1.2 +00.05dia. Four, 0.25

Collector - Emitter voltage Emitter - Collector voltage

Cross section AA

Collector current IC Collector dissipation Ambient temperature Operating Storage Soldering temperature Note: PC Topr Tstg Tsol

Internal Circuit
K C

Unless otherwise specified, the tolerances are as shown below. Dimensions 3 mm max. 3 < mm 6 6 < mm 10 10 < mm 18 18 < mm 30 Tolerance ±0.3 ±0.375 ±0.45 ±0.55 ±0.65

A

E

Terminal No. A K C E

Name Anode Cathode Collector Emitter

1. Refer to the temperature rating chart if the ambient temperature exceeds 25°C. 2. The pulse width is 10 µs maximum with a frequency of 100 Hz. 3. Complete soldering within 10 seconds.

Ordering Information
Description Photomicrosensor (Actuator Mounted) Part number EE-SA104

Electrical and Optical Characteristics (Ta = 25°C)
Item Emitter Forward voltage Reverse current Peak emission wavelength Detector Light current Dark current Leakage current Collector - Emitter saturated voltage Peak spectral sensitivity wavelength Rising time Falling time IR P IL ID ILEAK VCE (sat) P tr tf Symbol VF Value 1.2 V typ., 1.5 V max. 0.01 µA typ., 10 µA max. 940 nm typ. 0.5 mA min., 14 mA max. 2 nA typ., 200 nA max. --0.1 V typ., 0.4 V max. 850 nm typ. 4 µs typ. 4 µs typ. VR = 4 V IF = 20 mA IF = 20 mA, VCE = 10 V VCE = 10 V, 0 x --IF = 20 mA, IL = 0.1 mA VCE = 10 V VCC = 5 V, RL = 100 , IL = 5 mA VCC = 5 V, RL = 100 , IL = 5 mA Condition IF = 30 mA

EE-SA104 Engineering Data
Forward Current vs. Collector Dissipation Temperature Rating
Collector dissipation Pc (mW)
IF

EE-SA104

Forward Current vs. Forward Voltage Characteristics (Typical)

Light Current vs. Forward Current Characteristics (Typical)
Ta = 25°C VCE = 10 V

Forward current I F (mA)

Forward current I F (mA)

PC

Ta = -- 30°C Ta = 25°C Ta = 70°C

Ambient temperature Ta (°C)

Forward voltage VF (V)

Light current I L (mA)

Forward current IF (mA)

Light Current vs. Collector - Emitter Voltage Characteristics (Typical)
Ta = 25°C IF = 50 mA

Relative Light Current vs. Ambient Temperature Characteristics (Typical)
Relative light current I L (%)
IF = 20 mA VCE = 5 V

Dark Current vs. Ambient Temperature Characteristics (Typical)
VCE = 10 V 0 x

Light current I L (mA)

IF = 40 mA IF = 30 mA IF = 20 mA IF = 10 mA

Dark current I D (nA)

Response Time vs. Load Resistance Characteristics (Typical)

Collector -- Emitter voltage VCE (V)

Ambient temperature Ta (°C)

Ambient temperature Ta (°C)

Sensing Position Characteristics (Typical)
Relative light current I L (%)
IF = 20 mA VCE = 10 V Ta = 25°C (Center of optical axis)

Response Time Measurement Circuit
Input Output 90 % 10 %

Vcc = 5 V Ta = 25°C

Response time tr, tf ( s) µ

Input

Output

Load resistance RL (k)

Distance d (mm)

Actuator Dimensions
Note:
2.2±0.1 dia. 1.5--00.1dia.

1. Make sure that the portions marked with dotted lines have no burrs. 2. The material of the actuator must be selected by considering the infrared permeability of the actuator.

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

R

OMRON ELECTRONICS LLC
One East Commerce Drive Schaumburg, IL 60173

OMRON CANADA, INC.
885 Milner Avenue Toronto, Ontario M1B 5V8

OMRON ON­LINE
Global ­ http://www.omron.com USA ­ http://www.omron.com/oei Canada ­ http://www.omron.com/oci Printed in U.S.A.

847­882­2288
Cat. No. GC NAPMS­1 02/03

416-286-6465
Specifications subject to change without notice.




Others parts begin by ee
EE-1   EE-2   EE-3