Digchip : Database on electronics components
 
Member, Distributor  
Log In
Email:
Password:


Part: EE-SA103

Category:
 Optoelectronics
   -> Photosensors
             -> Photomicrosensor

Description: EE-SA103 Non-amplified Photomicrosensordata Sheet

Company: Omron Corporation

Datasheet: Download EE-SA103 datasheet     File size : 42 kB

Request For quote: Find where to buy EE-SA103



Datasheet text preview:
EE-SA103
Dimensions
Note: All units are in millimeters unless otherwise indicated.
0.3±0.1 1±0.08 0.3 ± 0.1

Photomicrosensor
Features
· An actuator can be attached. · PCB mounting type. · High resolution with a 0.5-mm-wide aperture.

(Actuator Mounted)

0.3 ± 0.1 0.3±0.1 Part C 2.3 1.6 +0.05 ia. 0d

Four, C0.3 6±0.15
Two, 0.5 Optical axis

Absolute Maximum Ratings (Ta = 25°C)
Item Emitter Forward current Pulse forward current
9.3±1

Symbol IF IFP VR VCEO VECO

Rated value 50 mA (see note 1) 1A (see note 2) 4V 30 V --20 mA 100 mW (see note 1) -- 25°C to 85°C -- 30°C to 100°C 260°C (see note 3)

Reverse voltage Detector
Collector - Emitter voltage Emitter - Collector voltage

0.3 max.

0.25 max.

1.2 +00.05 ia. d 6.75±0.2

Four, 0.25

Four, 0.5

Cross section BB

Cross section AA

Collector current IC Internal Circuit
K C

Collector dissipation Unless otherwise specified, the tolerances are as shown below. Dimensions 3 mm max. 3 < mm 6 6 < mm 10 10 < mm 18 18 < mm 30 Tolerance ±0.3 ±0.375 ±0.45 ±0.55 ±0.65 Ambient temperature Operating Storage Soldering temperature Note:

PC Topr Tstg Tsol

A

E

Terminal No. A K C E

Name Anode Cathode Collector Emitter

1. Refer to the temperature rating chart if the ambient temperature exceeds 25°C. 2. The pulse width is 10 µs maximum with a frequency of 100 Hz. 3. Complete soldering within 10 seconds.

Ordering Information
Description Photomicrosensor (Actuator Mounted) Part number EE-SA103

Electrical and Optical Characteristics (Ta = 25°C)
Item Emitter Forward voltage Reverse current Peak emission wavelength Detector Light current Dark current Leakage current Collector - Emitter saturated voltage Peak spectral sensitivity wavelength Rising time Falling time IR P IL ID ILEAK VCE (sat) P tr tf Symbol VF Value 1.2 V typ., 1.5 V max. 0.01 µA typ., 10 µA max. 940 nm typ. 0.5 mA min., 14 mA max. 2 nA typ., 200 nA max. --0.1 V typ., 0.4 V max. 850 nm typ. 4 µs typ. 4 µs typ. IF = 30 mA VR = 4 V IF = 20 mA IF = 20 mA, VCE = 10 V VCE = 10 V, 0 x --IF = 20 mA, IL = 0.1 mA VCE = 10 V VCC = 5 V, RL = 100 , IL = 5 mA VCC = 5 V, RL = 100 , IL = 5 mA Condition

EE-SA103 Engineering Data
Forward Current vs. Collector Dissipation Temperature Rating
Collector dissipation Pc (mW)
IF

EE-SA103

Forward Current vs. Forward Voltage Characteristics (Typical)

Light Current vs. Forward Current Characteristics (Typical)
Ta = 25°C VCE = 10 V

Forward current I F (mA)

Forward current I F (mA)

PC

Ta = -- 30°C Ta = 25°C Ta = 70°C

Ambient temperature Ta (°C)

Forward voltage VF (V)

Light current I L (mA)

Forward current IF (mA)

Light Current vs. Collector - Emitter Voltage Characteristics (Typical)
Ta = 25°C IF = 50 mA

Relative Light Current vs. Ambient Temperature Characteristics (Typical)
Relative light current I L (%)
IF = 20 mA VCE = 5 V

Dark Current vs. Ambient Temperature Characteristics (Typical)
VCE = 10 V 0 x

Light current I L (mA)

IF = 40 mA IF = 30 mA IF = 20 mA IF = 10 mA

Dark current I D (nA)

Response Time vs. Load Resistance Characteristics (Typical)

Collector -- Emitter voltage VCE (V)

Ambient temperature Ta (°C)

Ambient temperature Ta (°C)

Sensing Position Characteristics (Typical)
Relative light current I L (%)
IF = 20 mA VCE = 10 V Ta = 25°C (Center of optical axis)

Response Time Measurement Circuit
Input Output 90 % 10 %

Vcc = 5 V Ta = 25°C

Response time tr, tf ( s) µ

Input

Output

Load resistance RL (k)

Distance d (mm)

Actuator Dimensions
Note:
2.2±0.1 dia. 1.5--00.1dia.

1. Make sure that the portions marked with dotted lines have no burrs. 2. The material of the actuator must be selected by considering the infrared permeability of the actuator.

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

R

OMRON ELECTRONICS LLC
One East Commerce Drive Schaumburg, IL 60173

OMRON CANADA, INC.
885 Milner Avenue Toronto, Ontario M1B 5V8

OMRON ON­LINE
Global ­ http://www.omron.com USA ­ http://www.omron.com/oei Canada ­ http://www.omron.com/oci Printed in U.S.A.

847­882­2288
Cat. No. GC NAPMS­1 02/03

416-286-6465
Specifications subject to change without notice.




Others parts begin by ee
EE-1   EE-2   EE-3