|
|
Part: E3A2-DS70sss
Category:
Optoelectronics
-> Photosensors
-> Photo electric
Description: E3A2 Ac/dc Supply With Timer Models Data Sheet
Company: Omron Corporation
Datasheet: Download E3A2-DS70sss datasheet File size : 608 kB
Request For quote: Find where to buy E3A2-DS70sss
Datasheet text preview:
E3A2
E3A2
AC/DC Supply with Timer Models
Slim Sensor with Plug-in Outputs, Built-in Time Delays
s Plug-in replaceable outputs s Light-ON/Dark-ON operation, switch
E3A2
selectable
s Optional solid-state outputs s Polarized diffuse and through-beam
models s Timer models provide selectable ON-delay, OFF-delay and one-shot outputs
s Standard with 3 A relay output
Ordering Information
s SENSORS
Method of detection Sensing distance Part number Without timer ON-delay, OFF-delay, one-shot equal ON- and OFF-delays (0.1 to 5 seconds) Independent ON-delays and OFF-delays (0.1 to 5 seconds) Through-beam 10 m (32.8 ft) E3A2-10M4 E3A2-10M4T Retroreflective 3 m (9.8 ft) E3A2-R3M4 E3A2-R3M4T Diffuse reflective 70 cm (27.6 in) E3A2-DS70M4 E3A2-DS70M4T
E3A2-10M4D
E3A2-R3M4D
E3A2-DS70M4D
s ACCESSORIES
Description Solid-state output modules AC (SCR) output module; 200 mA, 250 VAC max. load DC NPN output module; 200 mA, 30 VDC max. load, dual complementary DC PNP output module; 200 mA, 30 VDC max. load, dual complementary Part number G3K-2R2P-1 G3KD-YR2P-1 G3KD-YR2P-2 E39-L7
Reflector adapter for stud-mounting E39-R1 reflector
s REPLACEMENT PARTS
Description Relay output module, SPDT, 3 A at 250 VAC (output supplied with each sensor) Reflector (supplied with retroreflective sensor) Mounting bracket (supplied with each sensor) Part number G6C-2117P-DC8 E39-R1 E39-L34
2
E3A2
E3A2
Specifications
Part number Method of detection Supply voltage Power consumption Relay output type DC solid-state output type AC solid-state output type Sensing distance E3A2-10s s s Through-beam Emitter: 0.82 W max. Receiver: 1.2 W max. Emitter: 0.82 VA max. Receiver: 1.2 VA max. 10 m (32.8 ft) E 3 A 2 - R 3s s s Retroreflective 1.5 W max. 2 VA max. 3 m (9.8 ft) with E39-R1 reflector (included) Pulse modulated red LED, polarized (680 nm) Opaque and mirror surface materials, 56 mm (2.20 in) min. dimension Adjustable Provided 70 cm (27.6 in) with 10 x 10 cm (3.94 x 3.94 in) 90% reflectance white mat paper Pulse modulated infrared LED (950 nm) Opaque and translucent materials E3A2-DS70s s s Diffuse reflective 24 to 240 VAC, 50/60 Hz; 12 to 240 VDC
Light source Detectable object type
Pulse modulated infrared LED (950 nm) Opaque materials, 26 mm (1.02 in) minimum dimension Fixed Not provided Type Max. load Type Max. load Min. load Max. inrush Off-state leakage current
Operation mode Sensitivity Mutual interference protection Control output Relay AC solidstate
Light-ON/Dark-ON, switch selectable
SPDT with G6C-2117P-DC8 output module (standard) 3 A, 250 VAC (p.f. = 1); 3 A, 30 VDC SCR with G3K-2R2P-1 output module (optional) 200 mA, 250 VAC 5 mA 2A 1 mA max. NPN-SPDT with G3KD-YR2P-1 output module (optional) PNP-SPDT with G3KD-YR2P-2 output module (optional) 200 mA, 30 VDC 2 VDC at 200 mA 15 ms max. with G6C-2117P-DC8 output module (standard) 30 ms max. with G3KD-2R2P-1 output module (optional) 1 ms max. with G3KD-YR2P-1 or -2 output modules (optional) Normal, ON-delay, OFF-delay, one-shot or equal ON- and OFF-delays, switch selectable Independent ON- and OFF-delays 0.1 to 5 seconds Provided (AC solid-state and DC solid-state output modules only) Provided Emitter: Power On (red LED) Receiver: Light Incident (red LED) and output stability (green LED); Output Operation (yellow LED) on timer-equipped models Light Incident (red LED) and Output Stability (green LED); Output Operation (yellow LED) on timer-equipped models
DC solidstate
Type Max. load Max. on-state voltage drop Relay AC solid-state output DC solid-state Type E3A2-s s sT Type E3A2-s s sD Range
Response time (ON and OFF) Timing functions
Circuit protection
Output short-circuit DC power supply reverse polarity
Indicators
Materials Mounting Connections Weight
Lens Case Conduit Wire
Plastic Plastic Side surface mount with two through holes; E39-L34 bracket and hardware included 1/2-14 NPT Terminal screws Emitter: 200 g (7.1 oz) Receiver: 200 g (7.1 oz) 200 g (7.1 oz)
(Table continues on the next page)
3
E3A2
Specifications Table - continued from previous page Part number Enclosure ratings Approvals Ambient temperature NEMA IEC 144 UL Operating Storage E3A2-10s s s 1, 4, 4X, 12 IP66 Listed, File Number E41515 -25° to 55°C (-13° to 131°F) -30° to 70°C (-22° to 159°F) E 3 A 2 - R 3s s s E3A2-DS70s s s
E3A2
s CONNECTIONS
Through-Beam Type
24 to 240 VAC 12 to 240 VDC Light Source Receiver
Retroreflective and Diffuse Reflective Types
See Output Circuit Diagrams
24 to 240 VAC 12 to 240 VDC
See Output Circuit Diagrams
24 to 240 VAC 12 to 240 VDC
s OUTPUT CIRCUIT DIAGRAMS
Relay output AC solid-state output
DC solid-state PNP output
DC solid-state NPN output
4
E3A2
s TIMING CHART
NOTE:
E3A2
1. For sensors without built-in timer functions, operation follows the NORM mode shown with multifunction time delay models. 2. T1, T2 and T denote set time, variable within 0.1 to 5 second range. 3. For multifunction time delay models (part numbers ending in "T"), the ONand OFF-delay time settings will be the same. 4. For ON- and OFF-delay models (part numbers ending in "D"), T1 and T2 are independently variable. 5. O.S.D.: one shot delay
5
E3A2
E3A2
Engineering Data
s EXCESS GAIN RATIO
Through-Beam Type Retroreflective Type Diffuse Reflective Type
Excess gain ratio
Excess gain ratio
Distance [m (ft)]
Distance [m (ft)]
Excess gain ratio
Distance [cm (in)]
s LIGHT SOURCE/RECEIVER SETTING RANGE
Through-Beam Type
s REFLECTOR SETTING RANGE
Retroreflective Type
Distance X [m (ft)]
Distance Y [mm (in)]
Distance Y [cm (in)]
Distance X [m (ft)]
s OPERATING RANGE
Diffuse Reflective Type
s DETECTING DISTANCE VS. MINIMUM TARGET SIZE (AT MAXIMUM SENSITIVITY)
Diffuse Reflective Type
Detecting distance [cm (in)]
Distance Y [mm (in)]
Distance X [cm (in)]
Area of detectable object [cm2 (in2)]
6
Others parts begin by e3
E3-1 E3-2 E3-3 E3-4
|
|
|
