|
|
Part: E32-C31
Category:
Optoelectronics
-> Photosensors
-> Photo electric
Description: E32 an Update: 14 of The Est Fiber-optic Cables Data Sheet
Company: Omron Corporation
Datasheet: Download E32-C31 datasheet File size : 15 kB
Request For quote: Find where to buy E32-C31
Datasheet text preview:
R
An Update: 14 of the Newest Fiber-Optic Cables
Solve More Application Problems With 14 of the Newest Fiber-Optic Cables H Combine cables with Omron's fiber-optic
amplifiers for a complete solution to your sensing application H Over 80 other fiber-optic cable solutions available, refer to E32 data sheet in Omron's Sensing Products catalog
E32
Ordering Information
J FEATURES
Application Robotic applications with constant flexing and little installation space at the sensing site Harsh environment applications requiring chemical-resistant sensing heads High-temperature sensing sites that also require chemical resistance Area detection senses objects coming in random positions anywhere within a wide beam, i.e., pill detection on a conveyor High-precision detection requires the same operating position regardless of the direction from which the target enters the detection area Minute object detection in severely spaceconstrained sensing sites Precise position detection with background suppression for reflective surface objects, i.e., positioning glass wafers, slides Features 1.5 mm diameter sensing head, small 4 mm bending radius for 90-degree turns prevents reduction in sensing distance M4 threaded head, 4 mm bending radius Teflon resin sheath protects fiber and 5 mm diameter sensing heads from chemicals, solvents and oils; side-view sensing - 40° to 150°C, side view sensing, small 2 mm diameter head for miniature target detection 30 mm sensing area 11 mm sensing area, side view 16 alternated light source/receiver fiber pairs over a 10.85 mm area, side view M3 threaded head, 2 m cable length M3 threaded head, 1 m cable length 2 mm dia. sensing head, standard fiber 2 mm dia. sensing head with 0.5 dia. x 15 mm probe detects objects as small as gold wire (0.01 mm dia.). Rugged aluminum square sensing head. When used in pairs, eliminate mutual interference by ordering one of each. Left side emitter Right side emitter Sensing method Through-beam Diffuse Diffuse Through-beam Part number E32-T22B E32-D22B E32-D21B E32-T14F
Through-beam
E32-T54
Through-beam Through-beam Diffuse Diffuse, coaxial Diffuse, coaxial Diffuse, coaxial Diffuse
E32-T16W E32-T16J E32-D36P1 E32-C31 E32-C41 E32-C42 E32 - D331
Convergent beam diffuse
E32-L56E1 E32-L56E2
Note: Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
J ACCESSORIES (ORDER SEPARATELY)
Description Small spot lens adapters Applicable fiber-optic cables Use with E32-D32 and E32-C42 fiber-optic cables Use with E32-C31 and E32-C41 fiber-optic cables Specification 3.7 mm dia. lens 3.7 mm dia. lens 4.8 mm dia. lens 3.7 mm dia. lens Part number E39 - F3A E39-F3A -5 E39 - F3B E39-F3C
2
E32
E32
Sensing Distance with Fiber-optic Cables
J THROUGH-BEAM FIBERS
: Long-distance mode D D : Standard mode : High-speed mode "Standard object" measurements were made with E3X-DA-N set to Standard mode. The size of standard object is the same as the fiber core diameter or the lens diameter for models with a lens. "Minimum sensing object" is shown in parentheses below the standard object. The minimum sensing object size was determined when the E3X-DA-N amplifier received light that exceeded a light incident value of 1000 (set to digital incident level display).
Indicates models that customers can cut to length for their application. Models without this mark are pre-cut by the factory to maintain their respective specifications. The table specifies the sensing characteristics of each fiber when used with the following amplifiers: Legend: DAN-HS E3X-DA-N (Digital amplifier - high speed mode) DAN-LD E3X-DA-N (Digital amplifier - long distance mode) DAN-SM E3X-DA-N (Digital amplifier - standard distance mode) -
J THROUGH-BEAM, GENERAL PURPOSE TYPE
Application Features Appearance Type Detection distance Standard object (Min. detectable object: opaque) 0.5-mm dia. (0.01-mm dia.) Part number
Flexible, resists breaking
Ideal for mounting on moving sections 4 mm bending radius
DAN-HS
1.5 m m di a.
80 mm 200 mm 220 mm
E32-T22B
DAN-SM DAN-LD
J SPECIAL-PURPOSE THROUGH-BEAM FIBERS
Application Features Appearance Type Detection distance Standard object (Min. detectable object: opaque) 3.0-mm dia. (0.01-mm dia.) Part number
Chemical resistant
Heat resistant
Side view Tefloncovered *1; withstands chemicals and harsh environments; Operating ambient temperature: - 30_C to 70_C ( - 22_F to 158_F) Side-view; resists 150°C *2; Detects minute targets; fiber sheath material: fluororesin; Operating ambient temperature: - 40_C to 150_C ( - 40_F to 302_F) Detects in a 30-mm area
5-mm dia.
DAN-HS DAN-LD DAN-SM DAN-SM DAN-LD DAN-SM DAN-SM DAN-LD
150 mm 400 mm 500 mm 80 mm 230 mm 290 mm 660 mm 1,800 mm 2,300 mm 660 mm 1,800 mm 2,300 mm
E32-T14F
2-mm dia.
1.0-mm dia. (0.01-mm dia.)
E32-T54
Area sensing *3
0.3-mm dia.*2
E32-T16W
30 m m
DAN-SM DAN-SM
Side-view; suitable for applications with limited spatial depth
0.2-mm dia.
E32-T16J
11 mm
DAN-LD DAN-SM
Note: 1. Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin. 2. For continuous operation, use the products within the temperature ranging from - 40°C to 130°C ( - 40°F to 266°F) 3. These figures are for a sensing distance of 100 mm and for detecting over a 11-mm area, or 10-mm area for the E32-T16. (Figures for the diameter of sensing objects are in the still state.)
3
E32
J DIFFUSE FIBERS
: Long-distance mode D D D : Standard mode : High-speed mode "Standard object" measurements were made with E3X-DA-N set to Standard mode. "Minimum sensing object" is shown in parentheses below the standard object. The values of the minimum sensing object were obtained at a distance where the smallest object (gold wire) can be sensed with the Diffuse Fiber Unit.
E32
The E3X-DA-N may continue to receive internal reflective light when it is set to the maximum sensitivity setting. In this case, set the amplifier to "two-point teaching with or without-object teaching."
Indicates models that customers can cut to length for their application. Models without this mark are pre-cut by the factory to maintain their respective specifications. The table specifies the sensing characteristics of each fiber when used with the following amplifiers: Legend: DAN-HS E3X-DA-N (Digital amplifier - high speed mode) DAN-LD E3X-DA-N (Digital amplifier - long distance mode) DAN-SM E3X-DA-N (Digital amplifier - standard distance mode) Application Features Appearance Type Detection distance (Values measured using white paper) 1 mm 3 mm 4 mm 10 mm 70 mm 90 mm 10 mm 30 mm 40 mm 50×50 (0.01-mm dia.) E32-D22B 100×100 (0.01-mm dia.) E32-D21B Standard object (Min. sensing object) 25×25 (0.01-mm dia.) Part number
Thin fiber
Minute object detection (0.5-mm dia.) Ideal for mounting on moving sections (R4)
0.5-mm dia. 2-mm dia.
DAN-HS DAN-SM DAN-LD DAN-HS DAN-SM DAN-LD DAN-HS
E32-D331
Flexible (resists breaking)
M4 screw
1.5-mm dia.
DAN-SM DAN-LD
J SPECIAL-PURPOSE DIFFUSE FIBERS
Application Features Appearance Type Detection distance (Values measured using white paper) 25 mm 75 mm 100 mm 10 mm 35 mm 45 mm 10 mm 35 mm 45 mm 50 mm 150 mm 200 mm 4 to 12 mm 100×100 mm Soda glass with 7% reflection factor E32-L56E1 E32-L56E2 300×300 (0.01-mm dia.) E32-D36P1 50×50 (0.01-mm dia.) E32-C42 50×50 (0.01-mm dia.) E32-C41 Standard object (Min. sensing object) 25×25 (0.01-mm dia.) Part number
Coaxial
M3 coaxial; highprecision positioning accuracy; possible to mount small-spot lens (E39-F3A-5/ F3B/F3C) M3 coaxial; highprecision positioning accuracy; possible to mount small-spot lens (E39-F3A-5/ F3B/F3C) 2-mm dia. coaxial; high-precision positioning accuracy; possible to mount small-spot (0.1 to 0.6 mm dia.) lens (E39-F3A)
DAN-HS
M3 screw
E32-C31
DAN-SM DAN-LD DAN-HS
M3 screw
DAN-SM DAN-LD DAN-HS
2-mm dia.
DAN-SM DAN-LD DAN-HS DAN-SM DAN-LD DAN-SM
Area sensing
Side-view; detection over wide areas
Convergent beam
Suitable for positioning crystal glass
4
E32
E32
Specifications
J THROUGH-BEAM FIBER-OPTIC CABLES
Part number E32-T14F E32-T16J E32-T16W E32-T22B E32-T54 Operating ambient temperature - 40°C to 70°C ( - 40°F to 158°F) with no icing - 40°C to 70°C ( - 40°F to 158°F) with no icing - 25°C to 55°C ( - 13°F to 131°F) with no icing - 40°C to 70°C ( - 40°F to 158°F) with no icing - 40°C to 150°C ( - 40°F to 302°F) with no icing* Operating relative humidity 35% to 85% with no condensation Permissible bending radius 40 mm 10 mm 10 mm 4 mm min. 35 mm Core material PMMA Sheath material Teflon resin PVC PVC PVC Fluoride resin Enclosure rating IEC IP67 IEC IP50 IEC IP50 IEC IP67 IEC IP67
*When used continuously between - 40°C and 130°C ( - 40°F and 266°F) Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
J DIFFUSE FIBER-OPTIC CABLES
Part number E32-D21B E32-D22B E32-D331 E32-D36P1 E32-C31 E32-C41 E32-C42 E32-L56E1 E32-L56E2 0°C to 70°C (32°F to 158°F) with no icing - 40°C to 70°C ( - 40°F to 158°F) with no icing Operating ambient temperature - 40°C to 70°C ( - 40°F to 158°F) with no icing Operating relative humidity 35% to 85% with no condensation Permissible bending radius 4 mm min. 4 mm min. 25 mm 25 mm min. 25 mm min. 25 mm min. 25 mm min. 35 mm min. 35 mm min. Fluoride resin IEC IP40 PVC Polyethylene IEC IP67 -- IEC IP67 Core material PMMA Sheath material PVC Enclosure rating IEC IP67
5
E32
E32
Dimensions
Unit: mm (inch)
J THROUGH-BEAM FIBER-OPTIC CABLES
E32 -T14F
Sensing head 5 (0.20) dia. Fluoride resin 4 (0.16) dia. Optical fiber, 2.2 (0.09) dia.
21 (0.83) 2 m (6.56 ft) 4.5 (0.18) Optical axis 100 (3.93)
E32 -T16J
14.5 (0.57) 10.7 3.3 (0.13) 2 Sensing surface Optical ax i s 19 (0.75) 27 (1.06) S e n s i ng he a d : A B S . Prism: PMMA Receiver E m i tter Sensing surface 2 x 11 (0.08 x 0.43) 4 (0.16)
20 (0.79)
4 (0.16) Two, 3.2-dia. mounti ng hol e, 6-dia. counters i nk i ng
2.2-dia. opti c al fi ber 2m (6.56 ft)
E32 -T16W
5 (0.20) S ens i ng surface 3 x 30 (0.12 x 1.18) 23 (0.91) 18 (0.71) 12 (0.47)
Mounting Holes
Two, M3
18.5 (0.73)
Optical ax i s
65 (2.56) 69 45 (2.72) (1.77)
45 (1.77)
S ens i ng head (ABS)
Two, 3.2 (0.13) dia. mounting holes, 6 (0.24) countersinking 2m (6.56 ft)
Optical fiber, 2.2 (0.09) dia.
6
Others parts begin by e3
E3-1 E3-2 E3-3 E3-4
|
|
|
