|
|
Part: EE2-3NUH-R
Category:
Description: Compact And Lightweight, High Breakdown Voltage, Surface Mounting Type
Company: NEC Electronics Inc.
Datasheet: Download EE2-3NUH-R datasheet File size : 367 kB
Request For quote: Find where to buy EE2-3NUH-R
Datasheet text preview:
DATA S H E E T
MINIATURE SIGNAL RELAY
EE2 SERIES
Compact and lightweight, High breakdown voltage, Sur face mounting type
DESCRIPTION
The EE2 series surface-mounting type sustaining high-performance of NEC EC2 series.
FEATURES
TM Compact and light weight TM 2 form c contact arrangement TM Low power consumption TM Reduced mounting space : 15 mm × 9.5 mm TM High-breakdown voltage of coil to contacts : 1500 Vac, 2500 V (rise time : 2 µs, fall time : 10 µs) TM Low power consumption : 100 to 140 mW TM Capable of High-power switching : 700 Vac, 4.2 A, 4 times in case of accident TM UL recognized (E73266), CAS certified (LR46266)
APPLICATIONS
Electronic switching systems, PBX, terminal equipment, telephone system.
For Right Use of Miniature Relays
DO NOT EXCEED MAXIMUM RATINGS. Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over current. Incorrect use could result in abnormal heating, damage to related parts or cause burning. READ CAUTIONS IN THE SELECTION GUIDE. Read the cautions described in NEC's "Miniature Relays" (ER0046EJ) when you choose relays for your application.
Document No. ER0017EJ4V0DS00 (4th edition) Date Published June 1999 M Printed in Japan
©
1994 (1996)
EE2 SERIES
PART NUMBER SYSTEM
EE2 - 5 S NUH - L
Pakaging code Nil : Tube type L : Embossed carrying tape (L type) R : Embossed carrying tape (R type) Nil NU NUX NUH NUN : Standard type : UL recognized, CSA certified type : High solder joint reliability type : Minimum footprint type : High solder joint reliability with minimum footprint type UL recognized, CAS certified type
Latch type Nil : Non-latch type S : Single coil latch type T : Double coil latch type Nominal voltage 3, 4.5, 5, 6, 9, 12, 24 volts EE2 series
OUTLINE DRAWINGS AND DIMENSIONS
Unit : mm (inch)
EE2-.. EE2-..NU
15 MAX. (0.59) 7.5 MAX. (0.30)
EE2-..NUX
15 MAX. (0.59) 7.5 MAX. (0.30)
note2 5.08 (0.2) 2-2.54 (2-0.1) 5.08 (0.2) 9.5 (0.37) 5.08 (0.2)
note2 2-2.54 (2-0.1) 5.08 (0.2) 9.0 (0.35)
EE2-..NUH
15 MAX. (0.59) 7.5 MAX. (0.30)
EE2-..NUN
15 MAX. (0.59) 7.5 MAX. (0.30)
10.0 MAX. (0.39)
note2 5.08 (0.2) 2-2.54 (2-0.1) 5.08 (0.2) 7.5 (0.30) 5.08 (0.2)
note2 2-2.54 (2-0.1) 5.08 (0.2) 7.5 (0.30)
Note 1. General torelance : ± 0.2 ( ± 0.008) Note 2. This pair of pins at the right end applies to double coil latch type only.
2
DATA SHEET ER0017EJ4V0DS00
10.6 MAX. (0.42)
1.0 (0.04)
1.6 (0.06)
10.35 MAX. (0.41)
10.0 MAX. (0.39)
1.0 (0.04)
1.35 (0.05)
EE2 SERIES
PAD LAYOUTS (bottom view)
1.0(0.04) note2 Type EE2-.. EE2-..NU EE2-..NUX EE2-..NUH EE2-..NUN A 3.0 (0.118) 3.0 (0.118) 2.73 (0.107) 2.0 (0.079) 2.0 (0.079) B 7.3 (0.287) 7.3 (0.287) 7.02 (0.276) 6.29 (0.248) 6.29 (0.248)
unit : mm (inch)
A
note2
B
5.08 (0.2)
3-2.54 (0.1)
Note 1. General torelance : ± 0.1 ( ± 0.004) Note 2. This pair of pads at the right end applies to double coil latch type only.
PIN CONFIGURATIONS (bottom view)
1 3 4 5 1 3 4 5 1 3 4 5 6
RS
S
12 10 9 8 12 10 9 8 7
R
Index mark of relay direction
12 10 9 8
Non-latch type (not energized position)
Single coil latch type (reset position) S : Coil polarity of set (operate) R : Coil polarity of reset (release)
Double coil latch type (reset position)
MARKINGS (top view)
SAFETY STANDARD AND RATING
UL Recognized (UL508) File No E73266 CSA Certificated (CSA C22.2 No 14) File No LR46266 30 Vdc, 2A (Resistive) 110 Vdc, 0.3A (Resistive) 125 Vdc, 0.5A (Resistive)
1 2
EE2-5
5
JAPAN
9606
3 Standard type 1 2
EE2-5NU
4
q Part number w Manufacturer e Country of origin r Date code t Index mark of relay direction (pin No.1, 12) y UL, CSA Marking
Spacing : UL114, UL478
TUV Certificate (EN60255 / IEC60255) No. R 9751153 (Nonlatch and Single-coil-latch) Creepage and clearance of coil to contact is more than 2 mm. (According EN60950) Basic insulation class
5
JAPAN
9606
6 4
3 UL recognized CSA certified type
DATA SHEET ER0017EJ4V0DS00
3
EE2 SERIES
PERFORMANCE CHARACTERISTICS
Contact Form Contact Material Contact Ratings (UL / CSA Rating) Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Maximum Carrying Current Minimum Contact Ratings Initial Contact Resistance Non-Latch Type Nominal Operating Power Single Coil Latch Type Single Coil Latch Type Operate Time (Excluding Bounce) Release Time (Excluding Bounce) Insulation Resistance Between Open Contacts Breakdown Voltage Between Adjacent Contacts Between Coil and Contact 2 Form c Silver alloy with gold alloy overlay 60 W, 125 VA 220 Vdc, 250 Vac 2A 2A 10 mVdc, 10 µA 1 50 m typ. (Initial) 140 mW (3 to 12 V), 200 mW (24 V) 100 mW 140 mW Approx. 2 ms Approx. 1 ms without diode 1000 M at 500 Vdc 1000 Vac (for one minute) 1500 V surge (10 × 160 µs 2) 1500 Vac (for one minute) 2500 V surge, (2 × 10 µs 3) Double Coil 1000 Vac (for one minute) Latch type 1500 V surge (10 × 160 µs 2)
Shock Resistance
735 m / s 2 (75 G) (misoperating) 980 m / s 2 (100 G) (destructive failure) 10 to 55 Hz double amplitude of 3 mm (20 G) (misoperating) 10 to 55 Hz, double amplitude of 5 mm (30 G) (Destructive failure) 40 to 85°C 18 degrees at nominal coil voltage (140 mW) No - load 1 × 108 4 operations (Non-latch type) 1 × 107 operations (latch type) 50 Vdc, 0.1 A (resistive) 1 × 106 operations at 85°C, 2 Hz 10 Vdc, 10 mA (resistive) 1 × 106 operations at 85°C, 2 Hz Approx. 1.9 g
Vibration Resistance Ambient Temperature Coil Temperature Rise
Running specifications
Load
Weight
1 This value is reference value in the resistance load. Minimum capacity changes depending on switching frequency and environment temperatur and the load. 2 rise time : 10 µs, fall time : 160 µs 3 rise time : 2 µs, fall time : 10 µs 4 This shows a number of operation where it can be running by which a fatal defect is not caused, and a number of operation by whicha steady characteristic is maintained is 1 × 107 times.
4
DATA SHEET ER0017EJ4V0DS00
EE2 SERIES
PRODUCT LINEUP Non-latch Type
Nominal Coil Voltage (Vdc) 3 4.5 5 6 9 12 24 Coil Resistance () ±10 % 64.3 145 178 257 579 1028 2880 Must Operate Voltage (Vdc) 2.25 3.38 3.75 4.5 6.75 9 18 Must Release Voltage (Vdc) 0.3 0.45 0.5 0.6 0.9 1.2 2.4 a t 20°C
Single-Coil Latch Type
Nominal Coil Voltage (Vdc) 3 4.5 5 6 9 12 24 Coil Resistance () ±10 % 90 202.5 250 360 810 1440 5760 Must Operate Voltage (Vdc) 2.25 3.38 3.75 4.5 6.75 9 18 Must Release Voltage (Vdc) 2.25 3.38 3.75 4.5 6.75 9 18
a t 20°C
Double-Coil Latch Type (Can not be driven by revese polarity for reverse operation.)
Nominal Coil Voltage (Vdc) 3 S R S R S R S R S R S R S R Coil Resistance () ±10 % 64.3 64.3 145 145 178 178 257 257 579 579 1028 1028 4114 4114 18 18 9 9 Must Operate Voltage (Vdc) 2.25 3.38 3.75 4.5 6.75 Must Release Voltage (Vdc) 2.25 3.38 3.75 4.5 6.75
a t 20°C
4.5
5
6
9
12
24 Note
Test by pulse voltage S : Set coil (pin No.1... + , pin No.5... ) R : Reset coil (pin No.10... + , pin No.6... ) The latch type relays should be initalized at appointed position before using, and should be enegized to specific polanity by a bone polabity to avoid wrong operation. Any special coil requirement, please contact NEC for availability.
DATA SHEET ER0017EJ4V0DS00
5
Others parts begin by ee
EE-1 EE-2 EE-3
|
|
|
