|
|
Part: MAX4066ACEE
Category:
Analog & Mixed-Signal Processing
-> Switches & Multiplexers
-> Analog Switches
Description: MAX4066, MAX4066A Low-Cost, Low-Voltage, Quad, Spst, CMOS Analog Switch
Company: Maxim Integrated Products
Datasheet: Download MAX4066ACEE datasheet File size : 595 kB
Request For quote: Find where to buy MAX4066ACEE
Datasheet text preview:
19-0439; Rev 1; 3/96
Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches
_______________General Description
The MAX4066/MAX4066A quad, SPST, CMOS analog switches are designed to provide superior performance over the industry-standard devices. These new switches feature guaranteed operation from +2.0V to +16V and are fully specified at 3V, 5V, and 12V. Both parts o ffer 45 on- r es is t ance and 2 channel- t o - c h a n n e l matching at 12V, plus 4 flatness over the specified signal range. Each device is controlled by TTL/CMOS input levels and can be used as a bilateral switch or multiplexer/ demultiplexer. Low off leakage current (100pA for the MAX4066A) and low power consumption (0.5µW) make the MAX4066/ MAX4066A ideal for battery-operated equipment. These parts are also suitable for low-distortion audio applications. Both devices are available in 14-pin DIP and SO packages, as well as a 16-pin QSOP. ESD protection is greater than 2000V per Method 3015.7.
____________________________Features
o Pin Compatible with 74HC4066 o Guaranteed On-Resistance: 170 max (3V supply) 45 max (12V supply) o Guaranteed Match Between Channels: 4 max (MAX4066) 2 max (MAX4066A) o Guaranteed Low Leakage Currents: 1nA at +25°C (MAX4066) 100pA at +25°C (MAX4066A) o Single-Supply Operation from +2.0V to +16V o V+ to GND Signal Handling o TTL/CMOS-Logic Compatible o Low Power Consumption: 0.5µW o Low Crosstalk: -86dB o Low Off Isolation: -58dB o Low Distortion: 0.03% o Wide Bandwidth: > 100MHz
MAX4066/MAX4066A
________________________Applications
Battery-Operated Equipment Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Sample-and-Hold Circuits Communication Circuits
______________Ordering Information
PART MAX4066CPD MAX4066CSD MAX4066CEE MAX4066C/D TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C PIN-PACKAGE 14 Plastic DIP 14 Narrow SO 16 QSOP Dice*
Ordering Information continued at end of data sheet. * Contact factory for dice specifications.
______________________________________________Pin Configurations/Truth Table
TOP VIEW
NO1 1 COM1 2 NO2 3 COM2 4 IN2 5 IN3 6 GND 7 14 V+ 13 IN1 12 IN4 TRUTH TABLE ON/OFF CONTROL INPUT H L STATE OF ANALOG SWITCH OFF O N C NO1 1 OM1 2 N N.C. 3 C O2 4 OIM2 5 IN2 6 G N3 7 ND 8 I 16 V+ 15 IN1 N 14 N 4
M AX4066 M AX4066A
11 NO4 10 COM4 9 8 COM3 NO3
M AX4066 M AX4066A
13 CO4 12 NOM4 11 C.C. 10 NOM3 9 O3
DIP/SO
N.C. = NO INTERNAL CONNECTION
QSOP 1
________________________________________________________________ Maxim Integrated Products
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches MAX4066/MAX4066A
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND) V+ .........-0.3V to +17V VIN_, VCOM_, VNO (Note 1) ...-0.3V to (V + +0.3V) Current (any terminal) .........30mA Peak Current (any terminal) ....100mA ESD per Method 3015.7 ........>2000V Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 10.00mW/°C above +70°C) ...800mW Narrow SO (derate 8.00mW/°C above +70°C) .....640mW QSOP (derate 9.52mW/°C above +70°C) ....762mW CERDIP (derate 9.09mW/°C above +70°C) ...........727mW Operating Temperature Ranges MAX4066C_ _/MAX4066AC_ _ .....0°C to +70°C MAX4066E_ _/MAX4066AE_ _...-40°C to +85°C MAX4066MJD/MAX4066AMJD .....-55°C to +125°C Storage Temperature Range .....-65°C to +150°C Lead Temperature (soldering, 10sec) .....+300°C
Note 1: Signals on NO_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum current rating.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS--Single +12V Supply
(V+ = 12V ±10%, GND = 0V, VINH = 4.0V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER ANALOG SWITCH Analog Signal Range VCOM, VNO RON (Note 3) V+ = 12V, ICOM = 2mA, VNO = 10V V+ = 12V, ICOM = 2mA, VNO = 10V TA = +25°C TA = TMIN to TMAX TA = +25°C C, E M MAX4066 MAX4066A 0.5 0.5 0 16 V+ 45 55 75 4 2 6 2 4 6 -1 -0.1 -6 -100 -1 -0.1 -6 -100 -2 -0.2 -12 -200 1 0.1 6 100 1 0.1 6 100 2 0.2 12 200 nA nA nA V SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
On-Resistance
On-Resistance Match Between Channels (Note 4)
RON
TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX MAX4066 MAX4066A C, E M MAX4066 MAX4066A C, E M MAX4066 MAX4066A C, E M
On-Resistance Flatness (Note 5)
V+ = 12V, RFLAT(ON) ICOM = 2mA, VNO = 10V, 5V, 1V V+ = 12V, VCOM = 0V, VNO = 10V
NO or NC Off Leakage Current (Note 6)
INO(OFF)
COM Off Leakage Current (Note 6)
V+ = 12V, ICOM(OFF) VCOM = 0V, VNO = 10V
COM On Leakage Current (Note 6)
ICOM(ON)
V+ = 12V, VCOM = 10V, VNO = 10V
2
_______________________________________________________________________________________
Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches
ELECTRICAL CHARACTERISTICS--Single +12V Supply (continued)
(V+ = 12V ±10%, GND = 0V, VINH = 4.0V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER LOGIC INPUT Input Current with Input Voltage High Input Current with Input Voltage Low DYNAMIC Turn-On Time Turn-Off Time On-Channel Bandwidth Charge Injection (Note 3) Off Isolation (Note 7) Crosstalk (Note 8) NO Capacitance COM Off Capacitance COM On Capacitance SUPPLY Power-Supply Range Supply Current Total Harmonic Distortion I+ THD VIN = 0V or V+, all channels on or off TA = TMIN to TMAX TA = TMIN to TMAX -1 0.001 0.03 1 V µA % tON tOFF BW VCTE VISO VCT C(OFF) VCOM = 10V, Figure 2 VCOM = 10V, Figure 2 Signal = 0dbm, Figure 4, 50 in and out CL = 1.0nF, VGEN = 0V, RGEN = 0, Figure 3 RL = 50, CL = 5pF, f = 1MHz, Figure 4 RL = 50, CL = 5pF, f = 1MHz, Figure 5 f = 1MHz, Figure 6 TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = +25°C TA = +25°C TA = +25°C TA = +25°C TA = +25°C TA = +25°C 100 1 -58 -86 9 9 22 10 15 25 100 150 75 100 ns ns MHz pC dB dB pF pF pF IINH IINL IN = 5.0V, all others = 0.8V IN = 0.8V, all others = 5.0V -0.5 -0.5 0.005 0.005 0.5 0.5 µA µA SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
MAX4066/MAX4066A
CCOM(OFF) f = 1MHz, Figure 6 CCOM(ON) f = 1MHz, Figure 6
_______________________________________________________________________________________
3
Others parts begin by ma
|
|
|
