|
|
Part: DG508ABK
Category:
Analog & Mixed-Signal Processing
-> Switches & Multiplexers
-> Analog Switches
Description: DG508A, DG509A Monolithic CMOS Analog Multiplexers
Company: Maxim Integrated Products
Datasheet: Download DG508ABK datasheet File size : 58 kB
Request For quote: Find where to buy DG508ABK
Datasheet text preview:
19-0028; Rev 3; 9/01
Monolithic CMOS Analog Multiplexers
General Description
Maxim's DG508A and DG509A are monolithic CMOS analog multiplexers (muxes): the DG508A is a single 8-channel (1-of-8) mux, and the DG509A is a differential 4-channel (2-of-8) mux. Both devices guarantee break-before-make switching. Maxim guarantees these muxes will not latch up if the power supplies are turned off with the input signals still present. Maxim also guarantees continuous operation when these devices are powered by supplies ranging from ±4.5V to ±18V. The DG508A/DG509A are plug-in upgrades for the industry-standard DG08A/DG509A, respectively. Maxim's parts have lower on-resistance, faster enable switching times, and significantly lower leakage currents. The DG508A/ DG509A also consume significantly lower power, making them ideal for portable equipment. o Improved Second Source o Operate from ±4.5V to ±18V Supplies o Symmetrical, Bidirectional Operation o Logic and Enable Inputs, TTL and CMOS Compatible o Latchup-Proof Construction o Monolithic, Low-Power CMOS Design
Features
DG508A/DG509A
Ordering Information
PART DG508ACJ DG508ACWE DG508AC/D DG508ABK DG508ADJ DG508ADY DG508AEGE DG508AEWE DG508AAK TEMP RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C -20°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C PIN-PACKAGE 16 Plastic DIP 16 Wide SO Dice* 16 CERDIP 16 Plastic DIP 16 Narrow SO 16 QFN 16 Wide SO 16 CERDIP
Applications
Control Systems Data Logging Systems Aircraft Heads-Up Displays Data-Acquisition Systems Signal Routing
Ordering Information continued at end of data sheet. *Contact factory for dice specifications.
Typical Operating Circuits
TOP VIEW
Pin Configurations
A0 1 EN 2 V- 3 S1 4 16 A1 15 A2 14 GND
-15V
-15V
ANALOG INPUT (OUTPUTS) +15V V+ CLOCK IN N.C. BIN QB QC QD AIN Q r01 r02 GND A +15V N.C.
V+ GND VS1 S2 S3 DG508A S4 D S5 S6 S7 S8 A0 A1 A2 EN
DG508A
13 V+ 12 S5 11 S6 10 S7 9 S8
ANALOG OUTPUT (INPUTS)
S2 5 S3 6 S4 7 D8
A0 1 EN 2 V- 3 S1A 4 S2A 5 S3A 6 S4A 7
16 A1 15 GND 14 V+
DG509A
13 S1B 12 S2B 11 S3B 10 S4B 9 DB
ENABLE IN (MUX ON/OFF CONTROL)
DA 8
8-CHANNEL SEQUENTIAL MUX/DEMUX
DIP/SO
Typical Operating Circuits continued at end of data sheet.
Pin Configurations continued at end of data sheet. 1
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
Monolithic CMOS Analog Multiplexers DG508A/DG509A
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to VV+ ...+44V GND ........ +25V Digital Inputs, VS and VD (Note 1).........-2V to (V+ + 2V) or 20mA, whichever occurs first Current (any terminal, except S or D) .........30mA Continuous Current, S or D .......20mA Peak Current, S or D (pulsed at 1ms, 10% duty cycle max) ..40mA Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 10.53mW/°C above +70°C) ..........842mW QFN (derate 19.2mW/°C above +70°C) ...........1538mW Narrow SO (derate 8.70mWI°C above +70°C) ...696mW Wide SO (derate 9.52mW/°C above +70°C).......762mW CERDIP (derate 10.00mW/°C above +70°C) ......800mW Operating Temperature Ranges: DG50_ACJ/CWE/CGE .......0°C to +70°C DG50_ABK ......-20°C to +85°C DGS0_ADJ/DY/EWE/EGE ........-40°C to +85°C DG50_AAK ....-55°C to +125°C Storage Temperature Range .....-65°C to +150°C Lead Temperature (soldering, 10s) .........+300°C
Note 1: Signals on S_, D_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum current ratings
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = 15V, V- = -15V, GND = OV, TA = +25°C, unless otherwise noted.)
PARAMETER SWITCH Analog Signal Range V ANALOG Sequence each switch on, VAL = 0.8V, VAH = 2.4V (Note 4) VD = 10V, IS = -200µA VD = 10V, IS = -200µA -15 170 +15 300 -15 170 +15 350 130 300 130 350 V SYMBOL CONDITIONS DG508AA DG508AD/E/B/C DG509AA DG509AD/E/B/C MIN TYP MAX MIN TYP MAX UNITS
Drain-Source OnResistance
RDS(ON)
Greatest Change in Drain-Source OnResistance Between Channels Source OffLeakage Current Drain Off- DG508A Leakage Current DG509A DG508A
RDS(ON)
R max - RDS(ON) min RDS(ON) = DS(ON) , RDS(ON)
6
6
%
-10V VS 10V IS ( O F F ) VEN = 0V VS = 10V, VD = -10V VS = -10V, VD = 10V VD = 10V, VS = -10V VD = 10V, VS = -10V VD = 10V, VS = -10V VD = -10V, VS = 10V -0.5 -2 -2 -2 0.002 -0.005 0.01 -0.015 0.005 -0.008 0.015 -0.03 0.007 -2 -0.015 2 -5 2 -5 2 -5 2 -5 0.5 -1 0.002 -0.005 0.01 -0.015 0.005 -0.008 0.015 -0.03 0.007 -0.015 5 nA 5 5 5 nA 1 nA
ID ( O F F )
VEN = 0V
Drain OnLeakage Current
ID ( O N ) DG509A
Sequence each VS(all) = VD = 10V switch on, VS(all) = VD = -10V VAL = 0.8V VS(all) = VD = 10V VAH = 2.4V (Note 2) VS(all) = VD = -10V
2
_______________________________________________________________________________________
Monolithic CMOS Analog Multiplexers
ELECTRICAL CHARACTERISTICS (continued)
(V+ = 15V, V- = -15V, GND = OV, TA = +25°C, unless otherwise noted.)
PARAMETER LOGIC INPUT Logic Input Current, Input Voltage High Logic Input Current, Input Voltage Low DYNAMIC Multiplexer Switching Time Break-Before-Make Interval Enable Turn-On Time Enable Turn-Off Time Off-Isolation Source Off-Capacitance Drain OffCapacitance DGS09A SUPPLY Positive Supply Current IDG508A IAH IAL VA = 24V VA = 15V All VA = 0V Figure 1 Figure 3 Figure 2 Figure 2 VEN = 0V, RL = 1k, CL = l5pF, VS = 7VRMS f = 500kHz (Note 3) VS = 0V, VEN = 0V, f = 140kHz VS = 0V, VEN = 0V, f = 140kHz VEN = 2.4V VEN = 0V -10 -10 -10 -0.002 0.006 -0.002 -0.002 0.6 0.2 0.4 0.2 68 5 25 12 0.02 -0.1 -0.01 0.02 -0.1 ±4.5 -0.01 ±18.0 0.2 -0.1 ±4.5 0.2 -0.1 1.0 0.7 1. 0 10 10 -10 10 -0.002 0.006 -0.002 -0.002 0.6 0.2 0.4 0.2 68 5 25 12 0.02 -0.01 0.02 -0.01 ±18.0 0.2 0.2 1.5 1.0 1. 0 10 µA µA SYMBOL CONDITIONS DG508AA DG509AA MIN TYP MAX DG508AD/E/B/C DG509AD/E/B/C MIN TYP MAX UNITS
DG508A/DG509A
ttransition tO P E N tON(EN) tO F F ( E N ) OIRR C S(OFF) C D(OFF)
µs µs µs µs dB pF pF
I+ II+ IV-, V+
VEN = 2.4V, all VA = 0V or 2.4V VEN = 2.4V, all VA = 0V or 2.4V VEN = 0V, all VA = 0V or 2.4V VEN = 0V, all VA = 0V or 2.4V (Notes 4, 5)
mA mA mA mA V
Negative Supply Current Positive Supply Current in Standby Negative Supply Current in Standby Power-Supply Range for Continuous Operation
_______________________________________________________________________________________
3
Monolithic CMOS Analog Multiplexers DG508A/DG509A
ELECTRICAL CHARACTERISTICS
(V+ = 15V, GND = 0V, TA = TMIN to TMAX, unless otherwise noted.)
DG508AA DG509AA MIN TYP MAX DG508AD/E/B/C DG509AD/E/B/C MIN TYP MAX
PARAMETER SWITCH Analog Signal Range
SYMBOL
CONDITIONS
UNITS
V ANALOG Sequence each switch on, VAL = 0.8V, VAH = 2.4V VEN = 0V VD = 10V, IS = -200µA VD = 10V, IS = -200µA VS = 10V, VD = -10V VS = -10V, VD = -10V VD = 10V, VS = -10V ID(OFF) VEN = 0V VD = -10V, VS = -10V VD = 10V, VS = -10V VD = -10V, VS = -10V Sequence each switch on, VS(all) = VD = -10V VAL = 0.8V, VS(all) = VD = 10V VAH = 2.4V (Note 2) VS(all) = VD = -10V VA = 2.4V VA = 15V All VA = 0V VEN = 2.4V VEN = 0V VS(all) = VD = 10V
-15
+15 400 400 +50
-15
+15 450
V
Drain-Source OnResistance
RDS(ON)
450 +50 -50 +200 -200 +200 -100 +200 -200 +100 -100 -30 +30 -30 -30 -30 -30 -100 -30 +30 -100 nA +100 -100 +100 -200 +100 +100 nA nA
Source Off-Leakage Current Drain OffLeakage Current DG508A DG509A
IS(OFF)
-50
Drain OnLeakage Current
DG508A ID(ON) DG509A
LOGIC INPUT Logic Input Current, Input Voltage High Logic Input Current, Input Voltage Low IAH IAL µA µA
Note 2: ID(ON) is leakage from driver into on switch.
Note 3: Off-isolation = 20log
IVSI IVDI
VS = input to off switch, VD = output due to VS. Note 4: Electrical characteristics (such as on-resistance) change when power supplies other than ±15V are used. Note 5: For designs requiring single 5V or dual ±5V operation, refer to Maxim's improved MAX338 and MAX339. Minimum operating voltage for DG508ADY and DG509ADY is ±9V.
4
_______________________________________________________________________________________
Monolithic CMOS Analog Multiplexers
Pin Description
PIN DG508A DIP/SO QFN 1, 15, 16 -- 2 3 47 -- 8 -- 912 -- 13 14 15, 14, 13 -- 16 1 25 -- 6 -- 710 -- 11 12 DG509A DIP/SO QFN -- 1, 16 2 3 -- 47 -- 8, 9 -- 1013 14 15 -- 15, 14 16 1 -- 25 -- 6, 7 -- 811 12 13 NAME A0, A2, A1 A0, A1 EN VS1S4 S1AS4A D DA, DB S8S5 S4BS1B V+ GND Address Input Address Input Enable Negative-Supply Voltage Input Analog Inputs, Bidirectional Analog Inputs, Bidirectional Analog Outputs, Bidirectional Analog Outputs, Bidirectional Analog Inputs, Bidirectional Analog Inputs, Bidirectional Positive-Supply Voltage Input Ground FUNCTION
DG508A/DG509A
Functional Diagrams
V+ VGND V+ VGND
S1 S2 S3 S4 S5 S6 S7 S8 DG508A CMOS DECODE LOGIC D
S1A S2A S3A S4A S1B S2B S3B S4B DG509A CMOS DECODE LOGIC DB DA
A2
A1
A0
EN
A1
A0
EN
DG508A 8-CHANNEL SINGLE ENDED MULTIPLEXER
DG509A DIFFERENTIAL 4-CHANNEL MULTIPLEXER
_______________________________________________________________________________________
5
Others parts begin by dg
|
|
|
