|
|
Part: DG201A
Category:
Analog & Mixed-Signal Processing
-> Switches & Multiplexers
-> Analog Switches
Description: Quad SPST CMOS Analog Switches
Company: Maxim Integrated Products
Datasheet: Download DG201A datasheet File size : 184 kB
Request For quote: Find where to buy DG201A
Datasheet text preview:
19-3959; Rev 1; 6/01
Quad SPST CMOS Analog Switches
General Description
The DG201A and DG211 are normally closed, quad single-pole single-throw (SPST) analog switches. These C M O S switches can be continuously operated with power supplies ranging from ±4.5V to ±18V. Maxim guarantees that these switches will not latch up if the power supplies are disconnected with input signals still connected. B o t h devices have guaranteed break-before-make switching. The DG201A differs from the DG211 primarily in switching speeds. The DG201A has a maximum turn-off time of 450ns and a maximum turn-on time of 6 0 0 n s . The DG211 has a maximum turn-off time of 500ns and a maximum turn-on time of 1000ns. C o m p a r e d to the original manufacturer's products, Maxim's DG201A and DG211 consume significantly lower power making them better suited for portable applications. Maxim has also eliminated the need for the third (VL) power supply that is required for the operation of the original manufacturer's DG211. o Guaranteed ±4.5V to ±18V Operation o No VL Supply Required o Nonlatching with Supplies Turned Off and Input Signals Present o CMOS and TTL Logic Compatible o Monolithic, Low-Power CMOS Design
Features
DG201A/DG211
Ordering Information
PART DG201ACUE DG201ACSE DG201ACJ DG201C/D DG201AEGE DG201AEUE DG201ADY DG201ADJ DG201AAK DG211CUE DG211CSE DG211CJ DG211C/D DG211EGE DG211EUE DG211DY DG211DJ TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C PIN-PACKAGE 16 TSSOP 16 SO 16 Plastic DIP Dice 16 QFN (5 5) 16 TSSOP 16 SO 16 Plastic DIP 16 CERDIP 16 TSSOP 16 SO 16 Plastic DIP Dice 16 QFN (5 5) 16 TSSOP 16 SO 16 Plastic DIP
Applications
Winchester Disk Drives Test Equipment Communications Systems PBX, PABX Guidance and Control Systems Head Up Displays Military Radios
Pin Configurations continued at end of data sheet.
Pin Configurations Typical Operating Circuit
5k 5k VIN x 10V *1 2 3 -15V 4 5 6 7 10k *8 16 * 15 14 40k
T O P VIEW
IN1 D1 S1 V1 2 3 4 5 6 7 8 16 IN2 15 D2 14 S2 13 V+
DG201A DG211
13 +15V 12 11 10 9* 20k
VOUT
GND S4 D4 IN4
DG201A DG211
12 N.C. 11 S3 10 D3 9 IN3
DIP/SO/TSSOP
LOGIC SWITCH ON OFF
PROGRAMMABLE GAIN AMPLIFIER
NOTE: *PINS 1, 8, 9, AND 16 ARE LOGIC CONTROL INPUTS
0 1
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
Quad SPST CMOS Analog Switches DG201A/DG211
ABSOLUTE MAXIMUM RATINGS (DG211)
V+ to V-.....44V VIN to Ground.... .........V-, V+ VL to Ground.........-0.3V, 25V VS or VD to V+...0, -40V VS or VD to V-.....0, 40V V+ to Ground...........25V V- to Ground........-25V Current, Any Terminal Except S or D.......30mA Continuous Current, S or D...........20mA Peak Current, S or D (pulsed at 1ms 10% duty cycle max).....70mA Note 1: Device mounted with all leads soldered to PC board.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Storage Temperature Range.......-65°C to +125°C Operating Temperature Range DG211C ..0°C to +70°C DG211D/E ....-40°C to +85°C Power Dissipation (TA = +70°C) (Note 1) 16-Pin Plastic Dip (derate 10.5mW/°C above +70°C) ..842mW 16-Pin Narrow SO (derate 8.3mW/°C above+70°C). ....696mW 16-Pin TSSOP (derate 9.4mW/°C above +70°C) ..........755mW 16-Pin QFN (5 5) (derate 19.2mW/°C above +70°C) .......1538mW
ELECTRICAL CHARACTERISTICS (DG211)
(V+ = +15V, V- = -15V, GND = 0, TA = +25°C, unless otherwise noted.) (For more information on TYP values see Note 2.)
PARAMETER SWITCH Analog Signal Range Drain-Source ON-Resistance Source OFF-Leakage Current Drain OFF-Leakage Current Drain ON-Leakage Current (Note 3) INPUT Input Current with Input Voltage High Input Current with Input Voltage Low DYNAMIC Turn-ON Time Turn-OFF Time Source OFF-Capacitance Drain OFF-Capacitance Channel ON-Capacitance OFF-Isolation (Note 4) Crosstalk (Channel to Channel) tON tO F F 1 tO F F 2 CS (OFF) CD (OFF) CD + S (ON) OIRR CCRR VIN = 5V, RL = 1k, CL = 15pF, VS = 1VRMS, f = 100kHz See Figure 1 Switching Time Test Circuit VS = 2V, RL = 1k, CL = 35pF VS = 0, VIN = 5V, f = 1MHz VD = 0, VIN = 5V, f = 1MHz VD = VS = 0, VIN = 0, f = 1MHz 460 360 450 5 5 16 70 90 dB pF 1000 500 ns IINH IINL VIN = 2.4V VIN = 15V VIN = 0 -1.0 -1.0 -0.0004 0.003 -0.0004 1.0 µA V ANALOG RDS (ON) IS (OFF) ID (OFF) ID (ON) VD = ±10V, VIN = 0.8V, IS = 1mA VIN = 2.4V VIN = 2.4V VIN = 0.8V VS = 14V, VD = -14V VS = -14V, VD = 14V VS = 14V, VD = -14V VS = -14V, VD = 14V VS = VD = 14V VS = VD = -14V -5.0 -5.0 -5.0 -15 115 0.01 -0.02 0.01 -0.02 0.1 -0.15 5.0 5.0 nA 15 175 5.0 V SYMBOL CONDITIONS MIN TYP MAX UNITS
2
_______________________________________________________________________________________
Quad SPST CMOS Analog Switches
ELECTRICAL CHARACTERISTICS (DG211) (continued)
(V+ = +15V, V- = -15V, GND = 0, TA = +25°C, unless otherwise noted.) (For more information on TYP values see Note 2.)
PARAMETER SUPPLY Positive Supply Current Negative Supply Current Logic Supply Current Power-Supply Range for Continous Operation I+ IIL VOP ±4.5 VIN = 0 and 2.4V (all) 0.02 0.01 0 0.4 0.4 0 ±18 V mA SYMBOL CONDITIONS MIN TYP MAX UNITS
DG201A/DG211
Note 2: Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. Note 3: ID(ON) is leakage from driver into "ON" switch. Note 4: OFF-Isolation = 20 log VS/VD, VS = input to OFF switch, VD = output.
ABSOLUTE MAXIMUM RATINGS (DG201A)
Voltages Reference to VV+.......44V GND....25V Digital Inputs (Note 1), VS, VD ....-2V to (V+ + 2V) or 20mA, whichever occurs first Current, Any Terminal Except S or D......30mA Continuous Current, S or D.........20mA Peak Current, S or D (pulsed at 1ms 10% duty cycle max).......70mA Operating Temperature Range DG201AA ........-55°C to +125°C DG201AD/E .....-40°C to +85°C DG201AC ........0°C to +70°C Storage Temperature Range.......-65°C to +150°C Power Dissipation (Note 2) 16-Pin Plastic Dip (derate 10.5mW/°C above +70°C) ...842mW 16-Pin SO (derate 8.7mW/°C above +70°C) ........696mW 16-Pin TSSOP (derate 9.4mW/°C above +70°C) ..755mW 16-Pin QFN (5 5) (derate 19.2mW/°C above +70°C)...1538mW 16-Pin CERDIP (derate 10.0mW/°C above +70°C)......800mW
Note 1: Signals on S_, D_, or IN_ exceeding V+ or V- on Maxim's DG201A will be clamped by internal diodes, and are also internally current limited to 25mA. Note 2: Device mounted with all leads soldered to PC board.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS (DG201A)
(V+ = +15V, V- = -15V, GND = 0, TA = +25°C, unless otherwise noted.) (For more information on TYP values see Note 3.)
PARAMETER SWITCH Analog Signal Range Drain-Source ON Resistance Source OFF-Leakage Current Drain OFF-Leakage Current Drain ON-Leakage Current (Note 4) V ANALOG RDS (ON) IS (OFF) ID (OFF) ID (ON) VD = ±10V, VIN = 0.8V, IS = 1mA VIN = 2.4V VIN = 2.4V VIN = 0.8V VS = 14V, VD = -14V VS = -14V, VD = 14V VS = 14V, VD = -14V VS = -14V, VD = 14V VS = -14V VS = 14V -1.0 -1.0 -1.0 -15 115 0.01 -0.02 0.01 -0.02 0.1 1.0 -1.0 1.0 -5.0 15 175 1.0 -5.0 -15 115 0.01 -0.02 0.01 -0.02 0.1 1.0 5.0 nA 15 200 5.0 V SYMBOL CONDITIONS DG201AA MIN TYP MAX DG201AC, D, E MIN TYP MAX UNITS
_______________________________________________________________________________________
3
Quad SPST CMOS Analog Switches DG201A/DG211
ELECTRICAL CHARACTERISTICS (DG201A) (continued)
(V+ = +15V, V- = -15V, GND = 0, TA = +25°C, unless otherwise noted.) (For more information on TYP values see Note 3.)
PARAMETER INPUT Input Current with Input Voltage High Input Current with Input Voltage Low DYNAMIC Turn-ON Time Turn-OFF Time Charge Injection Source OFF-Capacitance Drain OFF-Capacitance Channel ON-Capacitance OFF-Isolation Crosstalk (Channel to Channel) SUPPLY Positive Supply Current Negative Supply Current Power-Supply Range for Continuous Operation I+ IVOP All channels ON or OFF All channels ON or OFF -0.1 ±4.5 0.02 -0.01 ±18 0.1 -0.1 ±4.5 0.02 -0.01 ±18 V 0.1 mA tON tO F F 1 Q CS (OFF) CD (OFF) See Figure 1 Switching Time Test Circuit CL = 1000pF, VGEN = 0, RGEN = 0 VS = 0, VIN = 5V f = 140kHz 16 70 90 16 70 90 dB 480 370 20 5 5 600 450 480 370 20 5 5 pF 600 450 ns pC IINH IINL VIN = 2.4V VIN = 15V VIN = 0+ -1.0 -1.0 1.0 -1.0 -1.0 1.0 µA SYMBOL CONDITIONS DG201AA MIN TYP MAX DG201AC, D, E MIN TYP MAX UNITS
CD (ON) VD = VS = 0, + CS (ON) VIN = 0 VIN = 5V, ZL = 75 VS = 2.0V, f = 100kHz
Note 3: Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. Note 4: ID (ON) is leakage from driver into "ON" switch.
4
_______________________________________________________________________________________
Quad SPST CMOS Analog Switches
ELECTRICAL CHARACTERISTICS (DG201A)
(V+ = +15V, V- = -15V, GND = 0, TA = full opearting temperature range, unless otherwise noted.) (For more information on TYP values see Note 3.)
PARAMETER SWITCH Analog Signal Range Drain-Source ON Resistance (Note 5) Source OFF Leakage Current Drain OFF Leakage Current Drain ON Leakage Current (Note 6) INPUT Input Current with Input Voltage High Input Current with Input Voltage Low IINH IINL VIN = 2.4V VIN = 15V VIN = 0 -1.0 -1.0 1.0 -1.0 -1.0 1.0 µA V ANALOG RDS (ON) IS (OFF) ID (OFF) ID (ON) VD = ±10V, VIN = 0.8V, IS = 1mA VIN = 2.4V VIN = 2.4V VIN = 0.8V VS = 14V, VD = -14V VS = -14V, VD = 14V VS = 14V, VD = -14V VS = -14V, VD = 14V VS = -14V VD = 14V -200 -100 200 -200 -100 100 -100 200 -15 15 250 100 -100 100 nA -15 15 250 100 V SYMBOL CONDITIONS DG201AA MIN TYP MAX DG201AC, D, E MIN TYP MAX UNITS
DG201A/DG211
Note 5: Electrical characteristics, such as ON-Resistance, will change when power supplies other than ±15V, are used. Note 6: ID (ON) is leakage from driver into "ON" switch.
Pin Description
PIN DIP/SO/TSSOP 1, 16, 9, 8 2, 15, 10, 7 3, 14, 11, 6 4 5 12 13 QFN 15, 14, 7, 6 16, 13, 8, 5 1, 12, 9, 4 2 3 10 11 NAME IN1IN4 D1D4 S1S4 VGND N.C. V+ Input Analog Switch Drain Terminal Analog Switch Source Terminal Negative-Supply Voltage Input Ground No Connection Positive-Supply Voltage Input--Connected to Substrate FUNCTION
Switching Time Test Circuit
Switch output waveform shown for VS = constant with logic input waveform as shown. Note that VS may be +ve or -ve as per switching times test circuit. VO is the steady state output with switch on. Feedthrough via gate capacitance may result in spikes at leading and trailing edge of output waveform.
_______________________________________________________________________________________
5
Others parts begin by dg
|
|
|
