|
|
Part: DLV30W
Category:
Power Management
-> DC-DC Converters
-> Isolated DC-DC Converters
Description:
Company: Datel, Inc.
Datasheet: Download DLV30W datasheet File size : 79 kB
Request For quote: Find where to buy DLV30W
Datasheet text preview:
®
®
INNOVATION and EXCELLENCE
Dual Output
Mixed Voltage, DLV Models
VOUT Combinations of 3.3/2.5/1.8/1.5/1.2 Volts 30 Watt, DC/DC Converters
PRELIMINARY
Features
D
Two independently regulated outputs: 3.3V @ 6A; 2.5V, 1.8V, 1.5V or 1.2V @ 7A 30 Watts total output power Available input voltage ranges: 10-18V, 18-36V or 36-75V Independent output voltage adjustment Remote On/Off Control Synchronous rectifier; No load operation 2" x 2" package; Industry standard pinout IEC950/UL60950/EN60950 certified CE mark available (75VIN models) Input under and overvoltage shutdown Output overvoltage protection Thermal shutdown Fully Isolated (1500Vdc)
The DLV (Dual Low Voltage) Series from DATEL provides both digital I/O and core logic supply voltages from a single 2" x 2" industry-standard pinout, plastic package. The DLV series allows for any dual-output combination of 3.3, 2.5, 1.8, 1.5 or 1.2 Volts with associated output currents of 6 Amps for 3.3V outputs and 7 Amps for 1.2-2.5V outputs. Any combination of these output currents is permissable to a total of 30 Watts of output power. All models are available with input ranges of 10 to 18V (-D12), 18 to 36V (-D24) or 36 to 75V (-D48). Plug-in compatibility with a number of converters from other leading manufacturers is possible because DATEL offers these 30 Watt converters with the flexibility to add/remove the higher-voltage trim (pin 5). Each output is independently regulated with its own control loop to provide ±1.0% line and load regulation. Fully synchronous output topology allows no load operation and high efficiencies. Models are available with either positive or negative on/off control. Both outputs are internally synchronized to eliminate asynchronous beat frequencies. All models include input Pi filtering, input overvoltage and undervoltage shutdown circuitry, output overvoltage protection, output short-circuit and current limiting protection and thermal shutdown. These devices meet IEC950, UL60950 and EN60950 safety standards. CB reports are available on request. "-D48" models are CE marked (meet LVD requirements).
+INPUT
V1 OUTPUT
INPUT
SWITCH CONTROL OUTPUT RETURN
INPUT UNDERVOLTAGE AND OVERVOLTAGE COMPARATORS ON/OFF CONTROL SYNC (OPTION)
PWM CONTROLLER
OPTO ISOLATION
REFERENCE & ERROR AMP
V1 TRIM (OPTION)
PWM CONTROLLER
OPTO ISOLATION
REFERENCE & ERROR AMP
V2 TRIM
V2 OUTPUT
SWITCH CONTROL
Figure 1. Simplified Schematic
ATEL, Inc., Mansfield, MA 02048 (USA) · Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 · Email: sales@datel.com · Internet: www.datel.com
D LV Series
3 0 W, D UA L O U T P U T, M I X E D - VO LTAG E D C / D C C O N V E R T E R S
Performance Specifications and Ordering Guide
VOUT (Volts)
2.5 1.8 2.5 1.8 2.5 1.8 3.3 1.2 3.3 1.2 3.3 1.2 3.3 1.5 3.3 1.5 3.3 1.5 3.3 1.8 3.3 1.8 3.3 1.8 3.3 2.5 3.3 2.5 3.3 2.5
Model
DLV-2.5/7-1.8/7-D12 DLV-2.5/7-1.8/7-D24 DLV-2.5/7-1.8/7-D48
IOUT (Amps)
7 7 7 7 7 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7
Output R/N (mVp-p) Typ.
75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75
Input Regulation (Max.) Line
±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1%
Max.
TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD
Load
±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1%
VIN Nom. (Volts)
12 24 48 12 24 48 12 24 48 12 24 48 12 24 48
Range (Volts)
10-18 18-36 36-75 10-18 18-36 36-75 10-18 18-36 36-75 10-18 18-36 36-75 10-18 18-36 36-75
IIN (mA)
TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD
Efficiency Min.
TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD
Typ.
83% 83% 83% 83% 83% 83% 85% 85% 85% 83% 83% 83% 85% 85% 85%
Package (Case, Pinout)
C26, P48 C26, P48 C26, P48 C26, P54 C26, P54 C26, P54 C26, P54 C26, P54 C26, P54 C26, P47 C26, P47 C26, P47 C26, P40 C26, P40 C26, P40
PRELIMINARY
DLV-3.3/6-1.2/7-D12 DLV-3.3/6-1.2/7-D24 DLV-3.3/6-1.2/7-D48 DLV-3.3/6-1.5/7-D12 DLV-3.3/6-1.5/7-D24 DLV-3.3/6-1.5/7-D48 DLV-3.3/6-1.8/7-D12 DLV-3.3/6-1.8/7-D24 DLV-3.3/6-1.8/7-D48 DLV-3.3/6-2.5/7-D12 DLV-3.3/6-2.5/7-D24 DLV-3.3/6-2.5/7-D48
Typical at TA = +25°C under nominal line voltage and "balanced," full-power conditions: 3.3V @ 4.5A/2.5V @ 6A; 3.3V @ 5.2A/1.8V @ 7A; 3.3V @ 5.2A/1.8V @ 7A; 2.5V @ 7A/1.8V @ 7A. Any combination of rated IOUT current, not to exceed 30 Watts of output power. (See derating graphs.) M E C H A N I C A L S P E C I F I C AT I O N S
2.00 (50.08) PLASTIC CASE
Ripple/Noise (R/N) measured over a 20MHz bandwidth. All models are specicfied with TBD ceramic capacitors. Tested from no load to 100% load (other output at no load). Nominal line voltage, no load/balanced full-power condition.
See page 5 for Part Number Structure and ordering details.
DLV - 3.3 / 6 - 2.5 / 7 - D48 T N
Dual Low Voltage/ Mixed-Voltage Series V1 Nominal Output Voltage I1 Maximum Output Current Add T and N suffixes as desired Input Voltage Range: D12 = 10-18 Volts (12V nominal) D24 = 18-36 Volts (24V nominal) D48 = 36-75 Volts (48V nominal) I2 Maximum Output Current
0.48 (12.19)
Case C26
0.040 ±0.001 DIA. (1.016 ±0.025) 0.20 MIN (5.08) 1.800 (45.72) 0.10 (2.54) STANDOFF 0.020 (0.51)
V2 Nominal Output Voltage
I/O Connections
5 6
0.200 (5.08)
7 1 2
0.400 (10.16)
0.10 (2.54)
8 9
1.400 1.200 (35.56) (30.48) 3 EQ. SP. @ 0.400 (10.16)
2.00 (50.08)
4
0.40 (10.16)
Pin 1 2 3 4 5 6 7 8 9
Function P40 +Input Input No Pin On/Off Control +3.3V Trim* +3.3V Output Output Return +2.5V Output +2.5V Trim * Optional pins
Function P47 +Input Input No Pin On/Off Control +3.3V Trim* +3.3V Output Output Return +1.8V Output +1.8V Trim
Function P48 +Input Input No Pin On/Off Control +2.5V Trim* +2.5V Output Output Return +1.8V Output +1.8V Trim
Function P54 +Input Input No Pin On/Off Control +3.3V Trim* +3.3V Output Output Return +1.5V Output +1.5V Trim
BOTTOM VIEW
DIMENSIONS ARE IN INCHES (MM)
2
3 0 W, D UA L O U T P U T, M I X E D - VO LTAG E D C / D C C O N V E R T E R S
DLV Models
Output (continued)
Performance/Functional Specifications
Typical @ TA = +25°C under nominal line voltage, balanced "full-load" conditions, unless noted.
Input
Input Voltage Range: D12 Models D24 Models D48 Models Overvoltage Shutdown: D12 Models D24 Models D48 Models Start-Up Threshold: D12 Models D24 Models D48 Models Undervoltage Shutdown: D12 Models D24 Models D48 Models Input Current: Normal Operating Conditions Standby Mode: Off, OV, UV, Thermal Shutdown Input Reflected Ripple Current: Source Impedance D12 Models D24 Models D48 Models Internal Input Filter Type Reverse-Polarity Protection: D12 Models D24 Models D48 Models On/Off Control (Pin 4): D12, D24, D48 Models IIN = TBDµA @ TBDV Off = 0-0.8V, IIN = TBD @ 0V D12N, D24N, D48N Models Off = open or TBD to +5.5V IIN = TBDµA @ TBDV VOUT Accuracy 2.5V/1.8V Models 3.3V/1.5V and 3.3V/1.8VModels 3.3V/2.5V Models Minimum Loading Per Specification Ripple/Noise (20MHz BW) Line/Load Regulation Efficiency Trim Range Isolation Voltage: Input-to-Output Isolation Capacitance Isolation Resistance Current Limit Inception: 2.5/1.8V Models 2.5V @ 98%VOUT, 1.8V @ TBDA 1.8V @ 98%VOUT, 2.5V @ TBDA 3.3/1.5V Models 3.3V @ 98.5%VOUT, 1.5V @ TBDA 1.5V @ 98%VOUT, 3.3V @ TBDA 10-18 Volts (12V nominal) 18-36 Volts (24V nominal) 36-75 Volts (48V nominal) 19-23 Volts (21V nominal) 37-42 Volts (40V nominal) 77-81 Volts (79V nominal) 9-10 Volts (9.3V nominal) 16.5-18 Volts (17V nominal) 34.5-36 Volts (35V nominal) 8.5-9.6 Volts (9.3V nominal) 16-17 Volts (16.5V nominal) 33-35 Volts (34V nominal) See Ordering Guide 10mA typical
Current Limit Inception: 3.3/1.8V Models 3.3V @ 98.5%VOUT, 1.8V @ TBDA 1.8V @ 98%VOUT, 3.3V @ TBDA 3.3V/2.5V Models 3.3V @ 98.5%VOUT, , 2.5V @ TBDA 2.5V @ 98%VOUT, 3.3V @ TBDA Short Circuit Current: 3.3V Outputs 2.5V Outputs 1.8V Outputs 1.5V Outputs Overvoltage Protection: 2.5/1.8V Models 3.3/1.5V Models 3.3/1.8V Models 3.3/2.5V Models Maximum Capacitive Loading 2.5/1.8V Models 3.3/1.5V Models 3.3/1.8V Models 3.3/2.5V Models Temperature Coefficient Dynamic Load Response: 2.5/1.8V Models 2.5V (50-100% step to 1.5%VOUT) 1.8V (50-100% step to 2%VOUT) 3.3/1.5V Models 3.3V (50-100% step to 1%VOUT) 1.8V (50-100% step to 2%VOUT) 3.3/1.8V Models 3.3V (50-100% step to 1%VOUT) 1.8V (50-100% step to 2%VOUT) 3.3V/2.5V Models 3.3V (50-100% step to 1%VOUT) 2.5V (50-100% step to 1.5%VOUT) Start-Up Time: VIN to VOUT On/Off to VOUT Switching Frequency MTBF D12 Models D24 Models D48 Models Operating Temperature (Ambient): Without Derating: 2.5/1.8V Models 3.3/1.8V Models 3.3V/2.5V Models With Derating Case Temperature: Maximum Operational For Thermal Shutdown Storage Temperature
TBD Amps TBD Amps 98.5%VOUT TBD Amps TBD Amps TBD Amps average, continuous TBD Amps average, continuous TBD Amps average, continuous TBD Amps average, continuous Comparator, magnetic feedback TBD/TBD TBD/TBD TBD/TBD TBD/TBD TBD/TBDµF TBD/TBDµF TBD/TBDµF TBD/TBDµF ±0.02% per °C
Dynamic Characteristics
TBD TBD TBD Pi (0.039µF - 2.2µH - TBD) TBD minute duration, 6A maximum TBD minute duration, 4A maximum TBD minute duration, 2A maximum On = open or TBD to +VIN,
TBD µsec maximum TBD µsec maximum TBD µsec maximum TBD µsec maximum TBD µsec maximum TBD µsec maximum TBD µsec maximum TBD µsec maximum TBD TBD 225kHz (±TBD kHz)
On = 0-0.8V, IIN = TBD @ 0V
Output
1.5% / 2% maximum 1% / 2% maximum 1% / 1.5% maximum No load See Ordering Guide See Ordering Guide See Ordering Guide/Efficiency Curves ±5% each output 1500Vdc 470pF 100M
Environmental
TBD hours TBD hours TBD hours
TBD TBD TBD To +100°C (See Derating Curves) +100°C TBD minimum, TBD maximum 40 to +120°C
TBD Amps TBD Amps TBD Amps TBD Amps
3
D LV Series
3 0 W, D UA L O U T P U T, M I X E D - VO LTAG E D C / D C C O N V E R T E R S
Physical
Dimensions Case Material Pin Material Weight: 2" x 2" x 0.5" (50.8 x 50.8 x 12.7mm) Diallyl phthalate, UL94V-0 rated Brass, solder coated TBD
Trimming Output Voltages These DLV converters have a trim capability (pins 9 & 5) that allow users to independently adjust the output voltages ±5%. (Note: pin 5 is an option, see ordering information.) Adjustments to the output voltages can be accomplished via a trim pot, Figure 2, or a single fixed resistor as shown in Figures 3 and 4. A single fixed resistor can increase or decrease the output voltage depending on its connection. Fixed resistors should have absolute TCR's less than 100ppm/°C to minimize sensitivity to changes in temperature. A single resistor connected from the Trim pin 9 to +Output (pin 8), see Figure 3, will decrease the lower output voltage. A resistor connected from Trim pin 9 to Output Return (pin 7) will increase the lower output voltage. See Figure 4. Similarly, the higher output voltage can be adjusted using a single resistor connected from the Trim (pin 5) to +Output (pin 6) or to Output Return (pin 7). See Figures 3 and 4.
Primary to Secondary Insulation Level Operational
All models are specified with external TBD ceramic output capacitors. See Technical Notes/Graphs for details. Devices may be order with opposite polarity. See Part Number Suffixes and Technical Notes for details. Applying a voltage to On/Off Control (pin 4) when no input power is applied to the converter may cause permanent damage. Output noise may be further reduced with the installation of additional external output capacitors. See Technical Notes. On/Off control is designed to be driven with open collector or by appropriate voltage levels. Voltages must be referenced to the Input (pin 2). Demonstrated MTBF available on request. Trim function for the higher of two voltages available with "T" suffix. See Part Number Suffixes and Technical Notes for details.
+3.3V TRIM *
5 6 20k 5-22 TURNS +3.3V LOAD
Absolute Maximum Ratings
Input Voltage: Continuous: D12 Models D2A Models D48 Models Transient (100msec): D12 Models D24 Models D48 Models 23 Volts 42 Volts 81 Volts 25 Volts 50 Volts 100 Volts Input Current must be limited. TBD minute duration. Fusing recommended. 6 Amps 4 Amps 2 Amps Current limited. Devices can withstand an indefinite output short circuit.
1
+INPUT
+3.3V OUTPUT
2
INPUT OUTPUT RETURN 7
3
SYNC * 8
20k 5-22 TURNS
+2.5V LOAD
4
Input Reverse-Polarity Protection D12A Models D24A Models D48A Models Output Current On/Off Control (Pin 4) Max. Voltages Referenced to Input (pin 2) No Suffix "N" Suffix Sync Control (Pin 3) Max. Voltages "S" Suffix Storage Temperature Lead Temperature (Soldering, 10 sec.)
ON/OFF CONTROL
+2.5V OUTPUT +2.5V TRIM 9 * OPTIONAL PIN
Figure 2. Trim Connections Using A Trim Pot
+3.3V TRIM * 1 +INPUT +3.3V OUTPUT
5 6
RTRIM DOWN
+VIN +8 Volts +5.7 Volts 40 to +120°C +300°C
2
INPUT OUTPUT RETURN 7
+3.3V LOAD
3 SYNC * 8 4
+2.5V LOAD +2.5V OUTPUT +2.5V TRIM 9 RTRIM DOWN * OPTIONAL PIN
These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Specifications Table is not implied, nor recommended.
ON/OFF CONTROL
Figure 3. Trim Connections To Decrease Output Voltages Using Fixed Resistors
TECHNICAL NOTES
3.3 Volt Trim Down
On/Off Control The primary-side, remote On/Off Control function (pin 4) can be specified to operate with either positive or negative polarity. Positive polarity devices (no suffix) are enabled when pin 4 is left open or pulled high (+TBDV to +TBDV with respect to Input). Positive polarity devices are disabled when pin 4 is pulled low (0-0.8V with respect to Input). Negative polarity devices are off when pin 4 is high/open and on when pin 2 is pulled low. For applications where power sequencing is critical, the DLV series can be configured such that the On/Off Control pin will enable/disable only the higher of the two output voltages. Contact DATEL for more information.
RTDOWN (k) =
O
2.5 Volt Trim Down
RTDOWN (k) =
O
1.8 Volt Trim Down
RTDOWN (k) =
O
4
L N
L 1.73(V 0.86) N 1.8 VO
L N
L 2.41(V 1.18) N 2.5 VO
L N
L 3.48(V 1.577) N 3.3 VO
28.7
19.7
14.17
3 0 W, D UA L O U T P U T, M I X E D - VO LTAG E D C / D C C O N V E R T E R S
DLV Models
1
+INPUT
+3.3V OUTPUT
6 +3.3V LOAD
RTUP (k) =
2.84 VO 2.5
2
INPUT OUTPUT RETURN 7
2.5 Volt Trim Up
RT UP (k) = 5.88 VO 3.3
3
SYNC * 8
+2.5V LOAD +2.5V OUTPUT +2.5V TRIM
4
RTRIM UP
* OPTIONAL PIN
RT UP (k) =
1.49 VO 1.8
Figure 4. Trim Connections To Increase Output Voltages Using Fixed Resistors
PA R T N U M B E R S T R U C T U R E
Part Number Suffixes
DLV - 3.3 / 6 - 2.5 / 7 - D48 T N
Dual Low Voltage/ Mixed-Voltage Series V1 Nominal Output Voltage I1 Maximum Output Current V2 Nominal Output Voltage Add T and N suffixes as desired Input Voltage Range: D12 = 10-18 Volts (12V nominal) D24 = 18-36 Volts (24V nominal) D48 = 36-75 Volts (48V nominal) I2 Maximum Output Current
Standard DLV DC/DC's provide a Trim function (Pin 9) for the lower of the two output voltages. A Trim pin (Pin 5) for the higher voltage can be added by indicating a "T" suffix. An "N" suffix indicates that the On/Off Control function incorporates negative polarity logic. No Suffix Pins 5 not installed, positive polarity On/Off Control T Suffix Pin 5 added for higher voltage Trim option N Suffix Negative polarity On/Off Control
®
®
INNOVATION and EXCELLENCE
ISO 9001 REGISTERED
DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 Internet: www.datel.com Email: sales@datel.com
DATEL (UK) LTD. Tadley, England Tel: (01256)-880444 DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: 01-34-60-01-01 DATEL GmbH München, Germany Tel: 89-544334-0 DATEL KK Tokyo, Japan Tel: 3-3779-1031, Osaka Tel: 6-6354-2025
DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.
5
L N
ON/OFF CONTROL
9
1.8 Volt Trim Up
L N
L N
L N
L N
+3.3V TRIM *
5
RTRIM UP
3.3 Volt Trim Up
L N
19.7
28.7
Note: Resistor values are in k. Accuracy of adjustment is subject to tolerances of resistors and factory-adjusted output accuracy. VO = desired output voltage.
14.17
DS-0490
6/01
Others parts begin by dl
|
|
|
