|
|
Part: EPC1
Category:
Memory
-> ROM
-> EPROM
Description: Configuration EPROMs For Flex Devices
Company: Altera Corporation
Datasheet: Download EPC1 datasheet File size : 188 kB
Request For quote: Find where to buy EPC1
Datasheet text preview:
Configuration Devices for
®
SRAM-Based LUT Devices
Data Sheet
December 2002, ver. 12.2
Features
Serial device family for configuring APEXTM II, APEX 20K (including APEX 20K, APEX 20KC, and APEX 20KE), MercuryTM, ACEX® 1K, and FLEX® (FLEX 6000, FLEX 10KE, and FLEX 10KA) devices Easy-to-use 4-pin interface to APEX II, APEX 20K, Mercury, ACEX, and FLEX devices Low current during configuration and near-zero standby current 5.0-V and 3.3-V operation Software design support with the Altera® Quartus® II and MAX+PLUS® II development systems for Windows-based PCs as well as Sun SPARCstation, and HP 9000 Series 700/800 Programming support with Altera's Master Programming Unit (MPU) and programming hardware from Data I/O, BP Microsystems, and other manufacturers Available in compact plastic packages (see Figures 1 and 2) 8-pin plastic dual in-line package (PDIP) 20-pin plastic J-lead chip carrier (PLCC) package 32-pin plastic thin quad flat pack (TQFP) package 100-pin plastic thin quad flat pack (TQPF) package 88-pin Ultra FineLine BGATM package EPC2 device has reprogrammable Flash configuration memory 5.0-V and 3.3-V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface Built-in JTAG boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1 ISP circuitry is compatible with IEEE Std. 1532 for EPC2 configuration device Supports programming through Serial Vector Format Files (.svf), JamTM Standard Test and Programming Language (STAPL) Files (.jam), Jam STAPL Byte-Code Files (.jbc), and the MAX+PLUS II software via the MasterBlasterTM, ByteBlasterMVTM, or BitBlasterTM download cable nINIT_CONF pin allows a JTAG instruction to initiate device configuration Can be programmed with Programmer Object Files (.pof) for EPC1 and EPC1441 devices Available in 20-pin PLCC and 32-pin TQFP packages
Altera Corporation
DS-EPROM-12.2
1
Configuration Devices for SRAM-based LUT Devices Data Sheet
EPC4, EPC8, and EPC16 configuration devices have reprogrammable Flash configuration memory with density up to 16,000,000 or 32,000,000 bits with compression feature in these devices.
f
For detailed information on configuration devices, refer to the Enhanced Configuration Devices (EPC4, EPC8, & EPC16) Data Sheet. Note (1)
VCC N.C. N.C. N.C.
26
Figure 1. EPC1, EPC1441, EPC1213, EPC1064, & EPC1064V Package Pin-Out Diagrams
DATA N.C. N.C.
32
31
30
29
28
27
N.C.
DATA VCC N.C. N.C. N.C.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
25 24 23 22 21 20 19 18 17 16
N.C. N.C. VCC N.C. N.C. N.C. N.C. N.C. N.C. N.C.
DCLK N.C.
DCLK
DATA DCLK OE nCS 1 2 3 4 8 7 6 5 VCC VCC nCASC (2) GND
3 4 5 6 7 8 9 nCS
2
1
20
19 18 17 16 15
VCC N.C. N.C. N.C. N.C.
N.C. N.C. N.C. OE N.C.
N.C. N.C. N.C. OE
10 GND
11 N.C.
12
14 13 N.C.
N.C.
N.C.
N.C.
N.C.
(2) nCASC
8-Pin PDIP EPC1 EPC1441 EPC1213 EPC1064 EPC1064V
Notes to Figure 1 :
(1) ( 2)
20-Pin PLCC EPC1 EPC1441 EPC1213 EPC1064 EPC1064V
32-Pin TQFP EPC1441 EPC1064 EPC1064V
EPC1, EPC1441, EPC1213, and EPC1064 devices are one-time programmable devices. ISP programming is not available in these devices because they do not have JTAG pins. The nCASC pin is available on EPC1 and EPC1213 devices. On the EPC1064, EPC1064V, and EPC1441 devices, it is a reserved pin and should not be connected.
2
GND
Altera Corporation
N.C.
nCS
Configuration Devices for SRAM-Based LUT Devices Data Sheet
Figure 2. EPC2 Package Pin-Out Diagrams
DATA T DO TMS
25 24 23 22 21 20 19 18 9 10 11 12 13 14 17 15 16
VCC
T CK
N.C.
N.C.
N.C.
DATA VCC TDO TMS TCK
32 31 1 2 3 4 5 6 7 8
30 29 28
27 26
N.C.
N.C. VPP N.C. N.C. N.C. N.C. N.C. VPPSEL
DCLK VCCSEL
DCLK VCCSEL N.C. N.C. OE
4 5 6 7 8
3
2
1
20 19 18 17 16 15
VPP N.C. N.C. N.C. VPPSEL
N.C. N.C. N.C. OE N.C.
9 nCS
10 11 T DI GND
14 12 13 nINIT_CONF nCASC
N.C.
N.C.
nCS
N.C.
TDI
nCASC
GND
20-Pin PLCC
32-Pin TQFP
Functional Description
With SRAM-based devices, configuration data must be reloaded each time the system initializes, or when new configuration data is needed. Altera configuration devices store configuration data for SRAM-based APEX II, APEX 20K, Mercury, ACEX, and FLEX devices. Table 1 lists Altera configuration devices. Table 1. Configuration Devices Device
EPC16 EPC8 EPC4 EPC2 EPC1 (1) EPC1441 (1) EPC1213 (1) EPC1064 (1) EPC1064V Note to Table 1:
(1) These devices are one-time programable.
Description
16,000,000 × 1 bit with 3.3-V operation 8,000,000 × 1 bit with 3.3-V operation 4,000,000 × 1-bit device with 3.3-V operation 1,695,680 × 1-bit device with 5.0-V or 3.3-V operation 1,046,496 × 1-bit device with 5.0-V or 3.3-V operation 440,800 × 1-bit device with 5.0-V or 3.3-V operation 212,942 × 1-bit device with 5.0-V operation 65,536 × 1-bit device with 5.0-V operation 65,536 × 1-bit device with 3.3-V operation
Altera Corporation
nINIT_CONF
3
Configuration Devices for SRAM-based LUT Devices Data Sheet
Table 2 lists the configuration device used with each APEX II, APEX 20K, Mercury, ACEX 1K, and FLEX device. Table 2. Configuration Devices Used for Each APEX II, APEX 20K, Mercury, ACEX & FLEX Device (Part 1 of 2) Family
APEX II (1.5 V)
Device
EP2A15 EP2A25 EP2A40 EP2A70
Data Size EPC1064 EPC1213 EPC1441 EPC1 EPC2 EPC4 EPC8 EPC16 (Bits) EPC1064V
4,714,000 6,276,000 9,612,000 17,390,000 1,297,000 4,383,000 1,964,000 3,901,000 5,564,000 8,938,000 347,000 641,000 1,009,000 1,523,000 1,964,000 2,733,000 3,901,000 5,564,000 8,938,000 985,000 1,950,000 3,878,000 178,000 470,000 785,000 1,337,000 1 1 1 1 1 1 1 1 1 1 3 4 6 11 1 3 2 3 4 6 1 1 1 1 2 2 3 4 6 8 1 2 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Mercury (1.8 V)
EP1M120 EP1M350
APEX 20KC EP20K200C (1.8 V) EP20K400C EP20K600C EP20K1000C APEX 20KE EP20K30E (1.8 V) EP20K60E EP20K100E EP20K160E EP20K200E EP20K300E EP20K400E EP20K600E EP20K1000E APEX 20K (2.5 V) EP20K100 EP20K200 EP20K400 ACEX 1K (2.5 V) EP1K10 EP1K30 EP1K50 EP1K100
EP20K1500E 12,011,000
4
Altera Corporation
Configuration Devices for SRAM-Based LUT Devices Data Sheet
Table 2. Configuration Devices Used for Each APEX II, APEX 20K, Mercury, ACEX & FLEX Device (Part 2 of 2) Family Device Data Size EPC1064 EPC1213 EPC1441 EPC1 EPC2 EPC4 EPC8 EPC16 (Bits) EPC1064V
470,000 785,000 785,000 1,336,000 1,840,000 2,757,000 2,757,000 120,000 402,000 621,000 1,200,000 1,582,000 3,292,000 118,000 231,000 376,000 498,000 621,000 893,000 1,200,000 260,000 260,000 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
FLEX 10KE EPF10K30E (2.5 V) EPF10K50E EPF10K50S EPF10K100E EPF10K130E EPF10K200E EPF10K200S FLEX 10KA EPF10K10A (3.3 V) EPF10K30A EPF10K50V EPF10K100A EPF10K130V EPF10K250A FLEX 10K (5.0 V) EPF10K10 EPF10K20 EPF10K30 EPF10K40 EPF10K50 EPF10K70 EPF10K100 FLEX 6000/A (3.3 V) EPF6010A EPF6016 (5.0 V) / EPF6016A EPF6024A FLEX 8000A (5.0 V) EPF8282A / EPF8282AV (3.3 V) EPF8452A EPF8636A EPF8820A EPF81188A EPF1500A
EPF10K100B 1,2000,000
398,000 40,000 1 1
1 1
1 1
64,000 96,000 128,000 192,000 250,000
1
1 1 1 1
1 1 1 1 1
1 1 1 1 1
Altera Corporation
5
Others parts begin by ep
EP-1 EP-2 EP-3 EP-4 EP-5 EP-6 EP-7 EP-8 EP-9 EP-10 EP-11 EP-12 EP-13 EP-14 EP-15 EP-16 EP-17 EP-18 EP-19 EP-20 EP-21 EP-22 EP-23 EP-24 EP-25 EP-26 EP-27 EP-28 EP-29 EP-30 EP-31 EP-32 EP-33 EP-34 EP-35 EP-36 EP-37 EP-38 EP-39 EP-40 EP-41
|
|
|
